ACCWIFI1 Version 1.0 FRANÇAIS USER’S GUIDE ENGLISH WIFI REMOTE CONNECTION CRADLE ESPAÑOL www.lorextechnology.
Safety Precautions • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children or infants to play with it. • Keep the cords out of reach from children and infants. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Do not cover the product with a towel or blanket. • Do not use the product near water.
Product Includes ...............................2 Cradle Overview ..............................2 Supported Mobile Devices ................2 Getting Started ................................3 iPhone®/iPad® Ethernet Setup .........4 iPhone/iPad WiFi Setup ....................5 Using the iPhone®/iPad® App .........7 Live View................................................ 7 Zooming in Live View............................... 7 Changing the Cradle Password.................. 8 Changing the Video Quality........
Product Includes x1 x1 Ethernet Cable WiFi Cradle x1 Power Adapter Handheld monitor and camera(s) are sold separately.
1 3 Connect the cradle power adapter to the cradle. Connect the other end to a power outlet. Connect the cradle to your router using an Ethernet cable (included). INTERNET NOTE: Ensure the switch on the back is set to INTERNET mode. DIRECT mode is for service use only. Place the monitor onto the power/network 2 connector on the cradle. Use the stand-up guides to help place the monitor.
iPhone®/iPad® Ethernet Setup 1 Touch the Lorex Care icon to launch the app. 2 Enter the ID code for the cradle in one of the following ways: B FPO A C A. Tap QRCode and scan the QR code on the side of the cradle using your device’s camera. B. Tap Add and manually enter the UID printed on the back of the cradle. You may need to do this if your device does not have a camera (for example, 1st generation iPads). C. If your device is on the same network as the cradle, it will detect the cradle UID.
To connect the cradle to your Wi-Fi network, see below. iPhone/iPad WiFi Setup 1 Open the Camera List screen in Lorex Care. Press Back if you are currently connected to a camera. 2 Tap next to the Wi-Fi cradle 3 Tap Advanced Setting 4 Tap WiFi 5 The cradle will scan for available Wi-Fi networks. Select your Wi-Fi network 5 ENGLISH The app will connect to your monitor and stream live video from your cameras.
6 Enter the password for your Wi-Fi network Tap Join •••••• 7 Press 3 times to return to the Camera List. 8 Remove the Ethernet cable from the cradle. 9 Tap the monitor to connect Congratulations! You have successfully connected the cradle to your Wi-Fi network. You can now place the cradle in any location with good signal to your Wi-Fi network. NOTE: The Wi-Fi cradle must be connected to power and the monitor must be on the cradle to connect to the camera on your phone or tablet.
Live View You can view your camera in either portrait or landscape mode. Return to Camera List Select channel Take snapshot View/share snapshots Listen to camera Mute audio Talk to camera NOTE: The controls above are only shown in portrait mode. Zooming in Live View You can zoom in on the video in landscape or portrait mode.
Changing the Cradle Password The default password is 000000. It is recommended to create your own password to ensure that no one may access your video. To change the password: Open the Camera List screen in Lorex Care. Press if you are currently connected to a camera. 1 2 Tap next to the cradle 3 Tap Advanced Setting 4 Tap Security Code 5 Enter old password Enter new password Confirm new password 6 Tap OK. Press to the Camera List.
The video quality can be increased for fast Internet connections or decreased to improve the video performance. If the video is choppy or slow, it is recommended to reduce the video quality setting. To change the video quality: 1 Open the Camera List screen in Lorex Care. Press if you are currently connected to a camera. 2 Tap next to the cradle 3 Tap Advanced Setting 4 Tap Video Quality 5 Select the desired video quality 6 Tap List.
Android Ethernet Setup 1 Touch the Lorex Care icon to launch the app. FPO 2 FPO Tap Click here to add camera. 3 FPO Tap Scan Notes • If your device does not have a camera, you must enter the UID printed on the back of the cradle under UID. Then, skip to step 7. • You may be prompted to select the app that will be used to scan the QR code. Select Google and press Always to continue. Select Google Press Always 4 Line up the QR code on the top of the cradle using the camera on your mobile device.
Under Password, enter the default password 000000. 6 Under Name, enter a name for your monitor. 7 FPO Tap OK 8 The monitor will show up in your device list with an Online status. Tap the monitor to connect FPO The app will connect to your monitor and stream live video from your cameras. To connect the cradle to your Wi-Fi network, see the next page.
Android Wi-Fi Setup 1 2 You must connect the cradle to the Internet using an Ethernet cable before you can connect it to your Wi-Fi network. Complete the Ethernet setup as described in “Android Ethernet Setup” on page 10. Open the Camera List screen in Lorex Care. Press if you are currently connected to a camera. 3 Tap next to the Wi-Fi cradle FPO 4 5 Tap Edit Camera FPO Tap Advanced 6 FPO Tap Manage Wi-Fi networks The cradle scans for available Wi-Fi networks.
The cradle scans for available Wi-Fi networks. Tap Then, select your Wi-Fi network 7 Enter your Wi-Fi network’s password Tap OK The cradle will connect to your Wi-Fi network. Once connected, it will say Connected below the network name.
8 Tap OK twice to return to the Camera List. 9 Remove the Ethernet cable from the cradle. 10 Tap to connect to the cradle Congratulations! You have successfully connected the cradle to your Wi-Fi network. You can now place the cradle in any location with good signal to your Wi-Fi network. NOTE: The Wi-Fi cradle must be connected to power and the monitor must be on the cradle to connect to the camera on your phone or tablet.
Live View You can view your camera in either portrait or landscape mode. FPO Take snapshot View/share snapshots Mute audio Change channel Exit live view Zooming in Live View You can zoom in on the video in landscape or portrait mode.
Viewing and Sharing Snapshots You can take snapshots of live video from your cameras by pressing . You can view or share snapshots using the app. Snapshots are saved in .jpg format. They are saved to the /DCIM/P2PIPCAM/Snapshot folder on your device’s memory.
ENGLISH 2 Select the app you would like to share the snapshot with and use the app to share the file Lorex does not provide support for apps not published by Lorex. Changing the Cradle Password The default password is 000000. It is recommended to create your own password to ensure that no one may access your video. To change the password: 1 Open the Camera List screen in Lorex Care. Press if you are currently connected to a camera.
5 Tap Modify Security Code 6 Enter old password Enter new password Confirm new password Tap OK 7 Tap OK twice to return to Camera List. 8 Tap to connect to the cradle Changing the Video Quality The video quality can be increased for fast Internet connections or decreased to improve the video performance. If the video is choppy or slow, it is recommended to reduce the video quality setting. To change the video quality: 1 Open the Camera List screen in Lorex Care.
Tap Edit Camera 4 Tap, then select the desired video quality Tap OK 5 Tap OK to return to Camera List.
Technical Specifications Cradle Compatible Lorex Products BB4300 / BB3500 Series LW3400 Series Wi-Fi IEEE 802.11 b / g / n Wi-Fi Encryption WEP / WPA / WPA2 / WPA2 PSK Wi-Fi Frequency 2.4GHz Ethernet 10/100M Ethernet port DHCP DHCP Client / Server Mobile Apps iOS (v. X.X and higher) Android (v. X.X and higher) Power Adapter 5.0V DC 1500mA Weight 0.2lbs / 0.1kg Operation Temperature 32 ~ 104°F / 0 ~ 40°C 3.5in 88mm 3.2in 82mm 2.
Problem Solution Cannot connect to the monitor on my smartphone or tablet • Monitor is not placed on the cradle. The monitor must be on the cradle to enable remote connectivity. • Cradle is not connected to power. Connect the power adapter to the Wi-Fi cradle. • Ethernet cable not connected or Wi-Fi network not set up. Connect an Ethernet cable to the cradle and connect the other end to your router. For details, see “iPhone®/iPad® Ethernet Setup” on page 4 or “Android Ethernet Setup” on page 10.
CLEANING Clean the product with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth. • Keep your product away from hot, humid areas or strong sunlight, and do not get it wet.
USER’S GUIDE ACCWIFI1 Version 1.0 www.lorextechnology.com Copyright © Lorex Technology Inc.
