User's Manual

5
6
Camera antenna
Receives & Sends signals to or from the Monitor.
7
Bracket
Use the bracket to mount the camera on a wall or other flat
surfaces.
8
Pair button
The pair button is located on the back of the camera. Press pair
button when monitor is in pairing mode.
9
Deterrent light
Deterrent light flashes when motion detected.
3. Set up the Hardware
3.1 Monitor
1. Flip out the stand on the back of the monitor and position the antenna.
2. Insert the Micro SD memory card into the card slot on the monitor until you
hear a “click”.
3. The monitor uses 18650 button top rechargeable battery, if you want to use
battery to power the monitor, pls insert 18650 button top rechargeable battery,
make sure use power adaptor (plug in the monitor) to activate the battery after
insert the 18650 battery.
4. Connect an AC adapter to the power input on the back of the monitor. Connect
the other end of the adapter to a standard indoor power outlet.
5. Slide up the power switch to turn on the monitor.
6. The monitor displays the startup UI for a few seconds and then transitions to
the LIVE view.
3.2 Camera
3.2.1 General
The cameras included with your monitor are weatherproof and have an IP66
rating. Water can be sprayed on them and they will still work; however, the
cameras cannot be submerged.
The cameras can be exposed directly to the rain, it is recommended that, if they
are used outdoors, they should be mounted under some type of cover like a patio