User's Manual

10
different date.
Talk button: Push and hold to talk to camera, when it is pushed, the will be
displayed near the battery icon.
Channel loop: Touch this button will set monitor in channel auto switch mode,
monitor will display from channel 1—channel 2—channel3—channel4 and cycle, will
be displayed on the lower left of the monitor.
Motion Recording Indicator: Indicates motion recording status. You can go to monitor,
Menu==Recording Setup==Motion Recording On/Off to turn on/off auto recording for each
camera.
SEQ Display Mode: Displays when the monitor is in auto switch mode; it will change
channels automatically.
5. Menu
In live view or quad, touch to get shortcut buttons, touch the menu button to
open the main menu.
5.1 Camera Setup