User's Manual

9
mode, icon change to red
Short cut: Touch this button to show following shortcut menu buttons.
Channel button: Touch this button to change channel.
Menu: Touch this to open the main menu
LED Light: This icon appears when white spotlight camera is paired to the system.
touch this button to turn on camera LED light manually, when LED is on it shows :
touch again to turn off manually, icon shows
Siren: Touch this button will activate siren at camera side, touch and hold the button
to continue the siren, release to stop siren.
Zoom: Touch this button will go to zoom display, select five areas: top left, top right,
bottom left, bottom right and center to zoom specific area. Touch button to exit zoom
mode.
Manual recording: Touch this button to start manual recording, will display
and flash at the top of the monitor, touch again to stop recording.
Playback: Touch this button to open calendar for you to select recordings from
different date.
Channel loop: Touch this button will set monitor in channel auto switch mode,
monitor will display from channel 1—channel 2—channel3—channel4 and cycle, will
be displayed on the lower left of the monitor.
Motion Recording Indicator: Indicates motion recording status. You can go to