User's Manual

1 Using the system
By default, the camera(s) included with your system are automatically paired to the receiver. The
camera(s) and receiver will communicate with each other once they are powered on.
Note: It is recommended to power on the cameras before powering on the receiver.
1.1 Understanding the On-screen Display
With camera 1 properly connected and powered on, the system displays a full-screen live view of the
camera.
With more than one camera properly connected and powered on, the system displays up to 4 channels
in split screen with the live view of each camera. The figure below shows the display configuration for 2
cameras connected.