User's Manual

- Default Settings: Restore the system to default
settings
(Default No).
Select Yes and then press OK to confirm. The system
takes a few moments to restore default settings.
Also you can see the firmware version V0.18-140128, when
you update the firmware, you can see here to confirm whether
you have done well.
NOTE: Restoring default settings does not affect files
recorded to the memory card or reset the date and time on
the system.
- Format Memory: Select Yes to format the SD card. After
formatting, all the data stored in the SD card will be
deleted.
(default NO)
Note: Be cautious to use this function.
-Time Zone: Select the time zone where the system is
being used and enable / disable Daylight Savings Time
(DST).
-Firmware Upgrade: Upgrade the system’s firmware.
Ensure the system is up-to-date with the latest firmware for
optimal performance. There are two ways to upgrade
firmware: from the server, or from a SD card.