User's Manual

4 Network status Indicator –A red icon shows that the connection has failed or the system is
not connected to a network.A green icon
shows that the system is connected to the Internet and
tell you the monitor connect with internet mode. A yellow icon
shows that the system is connected
to the intranet and tell you the monitor connect with intranet mode.
Remote connection Indication- When a smartphone / tablet is accessing the system remotely, the
network status indicator changes to a remote connection icon
.
5 Talk back Indicator- Press Talk button on the monitor then talk back to the camera, the indicator .
will be shown on the LCD screen.
6 Recording Indicator–"REC" appears when recording is in progress. If viewing and recording video
from multiple cameras at once, the recording indicator will appear above each video display where
recording is enabled
7 Zoom Indicator-Press the Zoom button on the front panel of monitor to enter “×2” mode, the
indicator will be shown on the LCD screen.
shows on the screen ,you can use the joystick button
(▲▼◄► arrows)to navigate to parts of the video that are outside the range of screen. Press zoom
again to exit zoom mode.
8 Overwrite Indicator –Indicates Overwrite mode is on, which means the system will overwrite the
oldest recordings when the memory card is full. When you choose the overwrite function, the indicator
will be shown on the LCD screen
9 New Record Indicator- Indicates that there are new recordings saved to the SD card.
10 Time stamp-The current date and time on the system
11 Motion recording indicator- Indicates that motion recording is turned on.
12 Volume indicator-Shows the current volume of the receiver. You must be in single channel
viewing mode to change volume,
indicate the volume 0.
13 New download icon-
appears on the screen if new firmware is available