Manualshelf

User's Manual

ManualsBrandsRDI Technology ManualsCamera & PhotoDIGITAL WIRELESS CAMERA AND MONITOR SYSTEM
12345678910
8
SD Card Recording
The system is designed for SD card recording. You can manually record the video at your desire or the
receiver records when there is motion detected by the cameras. Before recording, you need to insert a
SD card to the SD card slot. The system can support the size of up to 16GB SD card.
Recording Mode
Auto Recording
Press (Record) Motion button on the remote control to set the system to automatic recording mode. In
this mode the receiver starts recording when motion detected by any activated camera. The recording
time can be set to 15s or 30s after last detection.
In quad mode, when motion is detected by a camera, the receiver switched to display the image from the
camera in full screen status and starts recording. After recording, it automatically switches back to quad
mode. Press (Record) Motion button again to cancel automatic recording mode.
Manual Recording
Press (Record) ● button on the remote control, the receiver starts recording. Press the button again to
cancel manual recording.
Schedule Recording
Set the recording start time and end time, then switch on schedule recording in the menu to enable
schedule recording. In this mode the receiver records at a certain time each day.
Playback
When there is new recorded file, the indication LED NEW below the LCD screen will be on, and the
indication icon on the LCD screen appears and flashes.
Follow the steps to play the recorded files.
1). In viewing mode, press the Enter button on the remote
control or the joystick on the receiver to enter the operation
interface.
2). Select the folder VIDEO and press Enter. You will see some
folders name by date. For example: 080101 means the videos in
this folder are recorded on January 1
st,
2008.
3). Select a folder and press Enter to enter submenu. You will
see the recorded files named by time. For example: 101024_1
means the video is recorded at 10:10:24 and from camera 1.
4). Select the video you want to view and press Enter button,
the video will be played on the LCD screen. Then you can use
the navigation buttons to play/pause, stop, forward, backward.