User's Manual

6
Remote Control
The remote control is supplied to operate the receiver. It includes all the operations of the buttons on the
receiver upper cover.
Quad – Press Quad button to view the images in quad mode.
Press (Channel) A, (Channel) M or Quad button again to exit
from quad mode.
Menu –Press to access the receiver menu. Press the button
again to exit.
Enter – In viewing mode, press to enter playback interface for
recorded videos.
Navigation/Enter – Use the buttons to control the receiver in
Quad Mode, Menu Mode and Playback mode.
- Quad Mode: In quad mode, press a navigation button to
view the image from the corresponding camera in full screen
mode.
- Menu Mode: Use the navigation buttons to navigate in
Menu Mode. Press the Enter button to confirm the menu
selection.
- Playback Mode: In playback mode, use the navigation
buttons to play/pause, stop, forward, backward, etc.
Scan/Del – Press the button to delete recorded files from SD
card in playback interface. Scan function is not available for
this product.
(Record) Motion – Press the button to switch the system to automatic recording mode. In auto
recording mode, the indication LED A will be on and the receiver starts recording when motion detected
by a camera. The recording time can be set to 15s or 30s.
(Record) ● – Press the button to start recording, press it again to stop recording. In manual recording
mode, the indication LED M will be on.
(Channel) A – Press the button to view cameras in automatic switching mode. Once the button is
pressed, the indication LED AUTO will be on.
(Channel) M – Press the button to manually switch between all activated cameras. Once the button is
pressed, the indication LED MANUAL will be on.
AV – When connecting a wireless receiver with LCD screen to TV, press this button to enable audio and
video output. This button is not available for this product.
Vol- / Vol+: Press the buttons to adjust the volume.