User's Manual

Main Menu

The Main Menu contains five submenus

1. Alert

In scan mode, Press the joystick button left or right to decrease

or Increase the volume of the buzzer when motion or Vox is

detected by the camera(s). If you want to turn off the buzzer or

button sounds, turn the alert volume to the minimum

setting(Default 0)

Camera

Use the menu to add camera(s) to the receiver, adjust the

camera on/off, adjust the brightness for camera.

1) Pairing

The system comes with camera(s) that have already been

paired. These cameras will communicate with the receiver once powered on.

The pairing function assigns each camera to a different channel on the wireless receiver (up to 4

cameras), and is necessary for configuring additional cameras.

NOTE: It is highly recommended to pair the cameras to the receiver before permanently mounting the

cameras.

a) Switch the camera on

b) Swith the monitor on

c) Press the menu button on the receiver. Navigate the joystick button to select pairing . Press in to

enter pairing menu

d) Select a channel using the joystick up/ down. Press in to accept the

channel