User's Manual

7
7 Zoom indicator- it displays on the screen while the video is setted in double size
8 Overwritten indicator- displays if the SD card is allowed to overwrite files when it is full.
9 New recording indicator- new recordings are saved on the SD card.
10 Battery Indicator- indicates the monitor battery’s life
11 Sound indicator- when the volume has been decrease to mute, the mute icon will be displays on
the screen. Use the “+” button to increase the volume
12 Nightlight indicator- The nightlight indicator is displayed when the nightlight on the camera is
turned on
13 Time/date- display the time & date
Low Signal / No Signal Warnings
When the camera is positioned too far from the receiver, warning messages “Out of Range” will be
displayed, and there will be one beeps sound alert every one minute to remind you the no signal
Adjusting the Receiver Volume
The receiver volume can be adjusted by using the touch button
VOL-/VOL+ when viewing a camera.
Press the touch button VOL- to decrease the volume, and
press the touch button VOL + arrow to increase the volume.
When the volume is set to one bar (lowest setting), the volume
is muted.
The volume adjustment icon will be displayed during volume
changes, and will disappear 3 seconds of inactivity.
Accessing Menu System
Press the MENU button on the receiver to enter menu system. Navigate the joystick button
up/down/left/right in the menu to select a setting, and press in the button to confirm the setting.