User's Manual

3
2) while all the connected cameras have been displayed, press again to enter Quad
mode,
3)In Quad mode, press once again to enter Auto sequency mode, then press again to
exit the Auto sequency mode
12. Zoom- The video can be set at normal or double size by pressing the zoom button. When the video
is in double size mode, navigating the joystick button
can be used to view the parts outside the
parent unit screen. Press the zoom button again to return to normal size. In the double size mode
displayed at the top of the screen.
13.Light button- press this button to turn on the LED light on camera, press again to turn off the light
14 Menu button- press this button to enter the main menu. Press menu again to exit the menu
15 Joystick button- allows movement to navigate through the menu. Pressing the joystick in will allow
you to select the menu option. In live view :1) press the joystick right/ left/up/ down to activate the pan-tile
function of the camera; 2) press the joystick in to enter the recording file list menu
Side and back button control
16.Power On/off - Slide the switch to ON or OFF position to switch
on/off the receiver.
17. DC jack 5V- Connect the included DC 5V power adaptor to power
the receiver and/or charge the receiver battery
18 SD Card Insert- the SD card will be inserted into this area to record
and save footage
19 Antenna- receives the video and sound from the
baby monitor
20 Battery compartment- this compartment allows the
battery to be replaced. Only use original batteries.
21 Speaker- produces the sound from the baby unite
22 Receiver stander- enables you to position the parent
unit on a flat surface