User's Manual

Select OFF to disable the temperature alert

4 Vox

set the vox sensitivity ( high, medium, low, off ) by joystick button,

and press in to confirm setting

5 Overwrite

Decide whether to record over earlier recorded files when the memory of

the Micro SD card is full

Troubleshooting

If you have problems with the system, there is often a quick and simple solution. Please try the following:

Problem Solution

No picture from a camera

1. Check all connections to the camera. Make sure the adaptor is

plugged in.

2. Make sure that the cameras and receiver are both ON.

3. Make sure that the camera is in range of the receiver.

4. If using the battery adaptor, try replacing the batteries

The picture is dropping

1. Move the camera closer to the receiver.

2. Try repositioning the camera, receiver or both to improve the

reception.

3. Adjust the monitor antenna to vertical position.

Audio problems

1. Ensure that the volume on the monitor is on.

2. Make sure that there is sound within range of the camera

microphone

3. If the unit emits a loud screeching noise (feedback), move the

camera or receiver farther apart.