User's Manual

e) A message will be display on the screen. The screen will count down from 30 to 0. You have to briefly

press the pair button on the baby unit within this

f) Press the Pair button on the back of the camera.

Once the camera has been paired, it will be immediately viewable on the

receiver monitor.

When the camera and monitor have been paired, the video from the camera will

be directly displayed on the screen of the monitor

2) Camera on /off

Select a camera by navigating the joystick button, then press in to

confirm camera on or off.

3) Brightness

The brightness of the screen can be adjusted by joystick button.

Navigating left makes the screen darker and navigating right

makes the screen lighter

3 . SETTING – In this submenu you can set Date/ Time, format

SD card, reset the receiver to factory defaults, choose language,

Temp.alert, Temp.display,

1) Date/Time- you can display the time on the screen by setting it in

this submenu. The date and time have the following value

YY/MM/DD HH: MM