User's Manual

Basic Setup

Step 1 of 2: Powering on the camera

1. Connect the power adapter to a power outlet and to the camera.

2. Slide the power switch to the ON position.

Step 2 of 2: Powering on the Video Monitor

1. Connect the power adapter to a power outlet, and to the video monitor directly or charging cradle

(ensure the video monitor firmly rests on the cradle). The video monitor’s charging LED indicator glows

red to indicate charging is in progress.

NOTE: It requires 6 hours to fully charge the rechargeable batteries.

2. Slide the power switch to ON position. The video monitor will automatically scan for cameras in range.