User's Manual

20
Adjusting the Timer settings
The timer feature allows the video monitor to beep after a set
duration as a reminder tool. If the monitor is used as a baby
monitor, the Timer tool is useful as a baby feeding timer.
To enable the Timer:
1. Press the Menu button on the video monitor.
2. Select Settings and then press the OK button.
3. Select Timer and then press the OK button.
4. Enter the desired time that you want the set the timer at using
the joystick. Press left / right to navigate the values. Press
up/down to adjust the values.
5. Press the OK button to save your settings.
6. Select ON and then press the OK button.
7. Press the OK button to save your settings.
Adjusting the temperature unit of measurement
The camera has a built-in temperature sensor. You can change the video monitor to display temperature
in Fahrenheit (F) or Celsius (C).
To change the unit of measurement:
1. Press the Menu button on the video monitor.
2. Select Settings and press the OK button.
3. Select Temp. Display and press the OK button.
4. Select either C for Celsius or F for Fahrenheit.
5. Press the OK button to save your settings.
Configuring the temperature alert range
You can configure the video monitor to alert you through alarm
beeps, when the temperature falls above or below the set
temperature range.
To configure the temperature alert range:
1. Press the Menu button on the video monitor.
2. Select Settings and then press the OK button.
3. Select Temp. Alert and then press the OK button.