User's Manual

Pairing Cameras

The camera included with the video monitor has already been paired up with the video monitor. If for any

reason your monitor and camera are not paired up, or you wish to add additional cameras, follow the

directions below.

To pair a camera to the video monitor:

1. Place the camera and video monitor 12 inches apart. Turn on the camera first and then the video

monitor.

2. Press the Menu button on the monitor, then select Pairing and

press the OK button.

3. Select an available channel, and press the OK button.

NOTE: By default, the camera included with the system is paired to

channel 1.

4. Press the Pair button with supplied stick on the camera within 30

seconds.

• You should immediately see video from the camera on the video

monitor.

5. OPTIONAL: To pair multiple cameras, repeat steps 2~4, selecting a different channel in the pairing

menu.

NOTE: You can add a maximum of 4 wireless cameras to the video monitor.