User's Manual

• Power adaptor x2
• Adaptor cable x1
• Hardware kit x1
• Manual x1
THINGS TO CONSIDER BEFORE INSTALLATION
For best performance, follow these simple guidelines:
• Camera(s) should be installed between 8 and 13 feet above the area to be
monitored
• The Camera should be aimed accordingly to optimize viewing area
• For best transmission, avoid installations where there are thick walls or major
obstructions between the Camera and Receiver
INSTALLING THE CAMERA (TRANSMITTER)
1. Unpack the Camera.
2. Decide whether the Camera will be wall-mounted or sit on a desk/table top. If
wall mounting, use the hardware kit in the package. The Camera can be adjusted
for either mounting scenario by rotating the Camera to the required position.
DESK TOP WALL MOUNTING
3. If using the 9V camera power adapter, just connect power jack. Make sure the
Camera is positioned no more than 5 1/2 feet from an AC power outlet.
4. Each camera’s channel number can be set by user, screw the lens part of
camera to open the lens cover, and then could set the camera’s channel number.
2