User's Manual

10
Installing the Alarm
1. The unit is designed to be used indoor or
outdoors. It can be mounted in toolboxes,
inside personal truck boxes or on gates,
sheds, and doors etc.
2. Selecting the best location will depend
on the intended use. Below are some
suggested mounting options. Regardless of
location, the gap between the wired Contact
and the Magnet must not be greater than
3/4” in the closed position.
Double
sided
mounting
tape
Anchored
screws
mounting
The mounting surface will determine whether to use
the double-sided tape or mounting screws. DO NOT USE
screws if mounting surface is less than two inches thick.