User's Manual

16
4. When the magnet and wired contact are
separated (door or lid opened), the red
indicator on the front of the Alarm will
begin flashing indicating the Alarm has
been activated. The Alarm’s siren will begin
sounding within 1 second or 5 seconds
(depending on the delay entry time setting).
The Alarm will continue to sound until
disarmed by a linked remote.
Disarming the Alarm:
1. If the Alarm has been activated, press the
disarm button to disarm the Alarm.
2. Prior to triggering the Alarm (opening the
door, gate, window etc) button to deactivate
the Alarm. If the remote control with the
correct security code is not used once the
Alarm is triggered, the Alarm will sound.
If the Alarm has been triggered, the red
indicator light on the front of the Alarm will
flash. Use the remote control at any time to
deactivate the Alarm.