User manual

VLA-120 C / VLA-240 C VARIO-LINE
12
1. POWER (STATUS INDICATOR)
Turn on the power, LED indicator lights.
2. SEND (STATUS INDICATOR)
In case data are supplied to amplifier, send LED indicator lights.
3. BUSY
Busy means under operating of "TALK" or digital message. Also,
when using remote controller, if you select "SLAVE" of NO. 8,
remote controller is not operated under busy LED.
4. TALK
When pressing "TALK", you talk via microphone with prechime
signal.
5. SPEAKER ZONES SELECTOR
Pressing one of the zone button delegates the signal to the desired
loud speaker zone. Then, attenuation functions in the main amp-
lifier are reset and zone power-out is converted to HI impedance
power output.
6. DIGITAL MESSAGE
- START/STOP
Message start and stop. This makes you replay, stop recorded
message of the memory bank (M1-M6) one time without setting
repeat function.
- REPEAT/STOP
You can replay or stop by repeat setting and time interval.
- MESSAGE BANK (M1-M6)
Message bank lets you select recorded bank.
7. DM-10A ON/OFF
"ON" position for DM-10 operating, "OFF" position not for DM-
10.
8. SLAVE/PRIORITY
For operating of 2pcs more for VLM-105/205 simultaneously, one
of VLM-105/205 can be set priority and the other is set to SLAVE.
Then, even though VLM-105/205 is operating under SLAVE, if you
push "TALK".
9. OUT-LINK
This is RJ45 connector for power supply of audio, data, make sure
that 4 pairs LAN cable is necessary for optimum operation.
10. AUX INPUT
AUX input is for cassette deck or other same products.
11. AUDIO OUT GAIN
This is audio output control volume.
1. POWER
Diode zeigt Betriebsbereitschaft an
2. SEND
Diode leuchtet, wenn Signale zum Verstärker gesendet werden.
3. BUSY
Diode leuchtet, wenn Signale zum Verstärker gesendet werden,
auch von in Serie geschalteten anderen Sprechstellen.
4. TALK
Sprechtaste : Nur bei gedrückter Taste kann gesprochen werden.
(vorher LS-Kreis aktivieren)
5. SPEAKER ZONES SELECTOR
Mit diesen Tasten können die einzelnen Lautsprecherkreise und
"ALL CALL" ausgewählt werden. Der Lautsprecherkreis sollte vor
dem Sprechen gewählt werden. Fernbedienung des Textmodules
und gleichzeitig Sprechen ist nicht möglich.
6. DIGITAL MESSAGE (nur bei Modell VLM-205)
- START/STOP
Mit diesem Taster wird das digitale Textmodul DM-10 aktiviert
und gestoppt.
- REPEAT/STOP
Mit diesem Taster wird das digitale Textmodul in einem Zeitin-
tervall (einstellbar im JDM-10A) aktiviert und gestoppt.
- MESSAGE BANK (M1-M6)
Drehschalter zur Auswahl der 6 Speicherbänke des DM-10.
7. DM-10A ON/OFF
Wenn der Schalter auf "OFF" steht ist es nicht möglich, das digitale
Textmodul anzusteuern.
8. SLAVE/PRIORITY
Bei gleichzeitiger Benutzung von mehreren Sprechstellen kann
mit diesem Schalter der Vorrang einer gewünschten Sprechstelle
bestimmt werden.
9. OUT-LINK
Buchsen für 8-pol. Übertragungskabel z.B. um weitere VLM-105/
205 in Serie anzuschließen.
10. AUX INPUT
Chinchbuchsen ermöglichen Einschleifen von Audio-Signalen,
z.B. CD-Player, Kassetten Deck u.ä.
11. AUDIO OUT GAIN
Lautstärkeregler für Audio Ausgangs Signale.
Remote Microphone VLM-105
Remote Microphone VLM-205 (identisch mit VLM-105, jedoch mit Fernbedienung für Digital Massage JDM-10A)