Owner's Manual

CLEANING & MAINTENANCE
SPIDER AND INSECT WARNING
Spiders and other insects can nest in the burner of this and any other Pro Burner, which causes
the gas to flow from the front of the burner. This dangerous “condition” can cause a fire behind
the valve panel, damaging the Pro Burner and making the Pro Burner unsafe to operate. Inspect
the burners once a year or if the Pro Burner has not been used for more than one month or if
any of the following conditions occur:
1) The smell of gas in conjunction with the burner flames appearing yellow.
2) The Power Burner does not reach temperature.
3) The Power Burner heats unevenly.
4) The burner makes popping noises
STAINLESS STEEL MAINTENANCE
The Power Burner is made of stainless steel construction.
Never clean the stainless steel when it is hot. After the initial cooking use, certain
areas of the Pro Burner may discolor. This is a normal discoloration caused by the internal heat
given off by the burner. Specks of grease can gather on the surface of the stainless steel and
get baked-on. These can be removed by using a mild abrasive pad (like Scotch Brite) with a
stainless steel cleaner. Use the mildest cleaner and always scrub in the direction of the grain.
Do not use steel wool to clean the Pro Burner.
Do not use abrasives on the polished highlights. Be extra careful when cleaning around the
highlights. Metal polisher or mild chrome cleaner can be used to bring back the luster on
highlights. To touch-up minor scratches in the stainless steel, sand the affected surface very
lightly, with 100-dry grit emery sandpaper in the direction of the grain
PRO BURNER GRATE MAINTENANCE
The easiest way to clean the grates is to scrub them with a barbeque brush immediately after
cooking is completed and the flame is turned off.
Wear a heat protective barbeque mitt to protect your hands from the heat and
steam. Dip a brass bristle barbeque brush in tap water and scrub the hot grates. Dip the brush
frequently in tap water. Steam, created as water comes in contact with the hot Power Burner,
helps loosen food particles stuck in the Power Burner. These food particles will either get burned
or fall into the cleaning pan. Cleaning of the Power Burner would be longer and more difficult if
the Pro Burner grates are allowed to cool before cleaning.