User Manual

SETTING of the first flight.
The settings are a matter of taste. Here is a starting point for a first flight
without worry.
Control surface movements and CG settings
C/G = 102-104 mm from Leading Edge to start. Move back slowly in small
increments to further improve control responses.
Neutral position of elevator.
Control surface settings: All dimensions are measured at the root of the
control surface and at the trailing edge.
Elevator: +12mm + / -12 mm
Rudder: +15mm / -15mm
Ailerons: +25mm / -15mm
Flap -> ailerons +8mm /-5mm
Snap Flap : Flap : 5mm , Ailerons (aligned with flap)