Specifications

2.0 1.0 USB
1024 x 7681024 x 768
Monitor
Resolution
Windows XPWindows XP
Operating
System (OS)
SVGAXGAGraphic Card
100 MByte30 MByteHDD Capacity
512 MByte256 MByteMemory
Pentium 3
(Over 1GHz )
Pentium 2
(Over 500 MHz)
CPU
Recommended Spec.Min. Spec.Spec.
T I P!
This program performs initial incubation setting value continuously
even if you disconnect the incubator with PC after starting incubation.
And when you connect the incubator with PC again, all data will be
sent off to the PC.
In other words, you can connect the incubator and PC only when you
need to change setting or check temp. & humidity during disconnection.
If you started incubation from PC, you must also terminate
incubation by PC.
2
22
2
1. Installation Specifications
T I P!
Program termination is different from incubation termination.
Even if you terminate the program for other works , incubation
will progress continuously. Incubation termination means all
hatching is done, and you can execute only with button
on your PC. .
T I P!
When you remove the USB cable from computer, be sure to terminate computer.
If not, error can be caused on the computer.