Specifications

23
2323
23
9. Special Mode Setting of Temperature and Humidity
Click
9
8
3
Click
1
10
If you click “Graph/DB” button, Graph screen will show up.
When you press “Setting” button, the button name will be changed by “PC-Confirm”, and blue bar will
be indicated for setting.
Click Point for controlling temp. &humidity on the date what you want to control.
If you move your mouse up or down, graph will go with the mouse. Click the Point one more on the
position where you want to set. (Refer to the next page.)
Indicating the project No. and name on progress.
Indicating selected incubation date.
You can modify temperature and humidity graph only in “PERIOD” state.
(“PERIOD” button shows all incubation period.)
If you click “24 HOUR” button, you can see a day’s(24hours) temperature & humidity setting value by time.
If you click the button, it indicates temp. and humidity setting value for 24 hours at intervals of an hour.
Blue one is humidity scale mark, and red is temperature scale mark.
Red one is temperature setting graph, and blue is humidity setting graph.
(If you want to control, click setting graph’s Point.)
This bar indicates the expected date of hatching. The graph indicates additional 3 days after the expected date.
1
2
3
4
5
6
7
8
10
9
6
5
4
7
Click
2