Specifications

22
2222
22
Select
1
Adjustment2
Click
Click 7
Select the species of birds. If you select the species of birds, the bird’s incubation data which is inputted on
“Logo” part will be set as setting value. (Temp. humidity, egg-turning angle& interval will be set automatically.)
Even if the setting value set up automatically, you can modify each setting value.
Here, you can modify the temperature, humidity, incubation period, and egg-turning angle& interval.
If you check RND, egg-turning angle & interval will get changed every time.
Temp. Mode Selecting:
Standard Mode – Progress incubation according to the set value (Temp. & humidity)
Special Mode – Temp. & humidity daily optional setting available, by using incubation graph.
Select egg size which you will progress incubation project. (Large, Standard, and Small sized egg)
You can not change the egg size onder incubation.
Working Mode Selecting :
Automatic mode – It is same with incubator automatic mode. But, it uses PC.
Manual mode – You can change each setting value free, D-Day will be counted up.
PC connecting mode – It is similar with manual mode. D-Day will be counted down.
(All three mode above will be made of DB, when you connect with PC.)
Input basic incubation data. After completing the setting, save it.
If you press this button, it starts incubation with melody within 2~10sec.
If you set the temperature and humidity with special mode, do not start incubation and refer to the next page.
1
Click
3
6
5
4
2
3
4
5
6
7
2
Incubation conditions set up on setting part