-PWF PG MJGF CFHJOT XJUI 3DPN REV. 4.
Contents How to use Rcom USB 20 / Rcom PRO 20 1. Introduction (1) Rcom USB, PRO 20 Introduction ( (2) Safety Precautions ) (3) Identification of Parts * (4) Basic Components + (5) Function of Digital Control & How to Operate , (6) SET UP(Other Functions) / Easy Function Operation - Introduction 2. Before use (1) How to Assemble the Incubator / Egg-Turning plate %$ Before use (2) What is an incubation room? / Preparation for Incubation %%r%& 3.
Contents How to use Rcom USB 20 / Rcom PRO 20 5. Incubation (1) Humidity & Air Maintenance during Incubation / &$ Maintenance after Hatching (2) Dew Condensation Introduction &$ 6. How to Clean (1) How to Disassemble &% (2) How to Clean && How to Clean 7. Product Information (1) Servicing / Frequently Asked Questions (FAQ) &' Product Information (2) Troubleshooting &( (3) Specification &) The result of Hatching can be changed by a large numbers of factors. Autoelex Co., Ltd.
1. Introduction (1) Rcom 20 Introduction Rcom 20 Thank you for choosing the Rcom incubator. The Rcom 20 incubator is the first incubator with creditability to have a superior design and function which help in controlling optimum incubation conditions. It has two sensors, one for detecting surrounding environments and the another for internal incubator conditions.
1. Introduction Electrical hazards Do not use a damaged power Do not pull the cord when cord or loose outlet. taking out the power cord, and ▶ Risk of electric shock or fire. keep wet hands away from connecting plug. ▶ Risk of electric shock or fire. Setting Cautions (2) Safety Precautions Be careful the details below when you use. Never pull the plug out of the outlet during the incubation period. Do not install in moist or humid environment. ▶ Risk of damage or fire within the incubator.
(3) Identification of Parts and Compositio 1. Introduction Identification of Parts View Window For a clear view of the incubation process. (Double Skin Viewing Window) Serial No. (EX:RCM0950278) Power Connecting (the rear) Egg Tray For connecting power cord. Vents for air circulation For circulating warm air Small, Standard, or Large egg tray according to egg size.
1. Introduction (4) Basic Components Basic Components F9 5F Main Body-2 Main Body-1 F9 5F BH :FC Water Cap Egg-Turning Plate User's Manual View Window Small Egg Tray Duplicated View Window Easy function operation Power Cord Standard Egg Tray * Can be attached anywhere for easy viewing < USB MODEL > Large Egg Tray Gc`X GYdUfUhY`m PC SOFTWARE CD Universal Tray Divider(10EA) Universal Tray SET Rolling Divider SET USB Cable ઔ USB MODEL - You can download updated information at www.Rcom.co.
(5) Function of Digital Control & How to Operate 1. Introduction Function of Digital Control & How to Operate Phqx#Exwwrq Xs#Exwwrq Select Birds Incubation Termination Temp. & Humidity UP Setting Value Change |w Vhohfw#Exwwrq Grzq#Exwwrq kv~u Select Auto/Manual Pass to next stage Temp.
(6) SET UP(Other Functions) / Easy Function Operation 1. Introduction ▶ Push SET UP key and then select each function icon using UP/DOWN key(ENTER) SET UP(Other Functions) WARNING T.CAL Temperature Calibration H.CAL Fatal Damage with Incorrect Calibration Calibration 5@5FA High Alarm 5@5FA Abnomal low Alarm Be sure to read CAUTIONS. We do no recommend customers to recalibrate by their own. If you need to recalibrate, please ask purchase place.
(1) How to Assemble the Incubator / Egg-turning plate 2. Before use How to Assemble * ) ▶ Lock the three locking buttons at the front and rear of the incubator. View Window ( + BACK Standard Tray 110V~120V ' ▶ Insert the power cord in the socket at the back of the main body. * Fit the water cap. Be careful when you assemble egg turning plate.
2. Before use (2) What is an incubation room? / Preparation for Incubation What's an Incubation Room? / Preparation for Incubation The Incubation Room is a confined space for setting and operating an incubator. Because the incubation room environment has a considerable effect on hatch rate, it's recommended to control the environment for setting up an incubator; there should be little noise and vibration around and temperature ranging 28℃(82.4℉) with small variation in temperature.
2. Before use (2) What is an incubation room? / Preparation for Incubation Some gap (about 2mm) around the eggs is needed for easy egg turning as shown on the below. ▼ About 2mm F K5H9 ※ When you use the 'universal rolling divider' which is sold separately, be careful to adjust the distance of rolling divider so that eggs do not roll out of position. Refer to the picture rignt side.
(1) Incubation Modes / Incubation start with Automatic Mode 3. Function Setting Q Rcom Pro 20 incubator has two modes as automatic and manual mode, and Rcom USB 20 incubator has three modes as automatic, manual, and PC connecting mode. Incubation Modes Auto incubation MANUAL button (Selection of birds) ENTER button (Auto incubation starts after two seconds) Temperature setting ྛ Setting of date of temperature change in the final stage of incubation.
3. Function Setting (2) Incubation start with Manual Mode Incubation start with Manual Mode This mode helps users to set temp. humidity, and egg turning etc. according to their needs. This mode is ideal for those persons who are experienced in incubation. ▶ Press MENU button on basic screen. MENU ▶ Select the species of birds with UP/DOWN button and press ENTER button then it goes to incubation conditions setting mode. ▶ Set required temp.
(2) Incubation start with Manual Mode 3. Function Setting Egg-turning angle setting ⑦ Setting of egg turning angle of early and middle stages of incubation. ⑧ Setting of date of egg turning angle change in the final stage of incubation. ▶ The egg turning angle showing on LCD screen may be different from the setting angle depending on egg tray (based on standard egg tray) and size of eggs. In general, the egg turning angle of early and middle stages is 90° for chicken, golden pheasant, pheasant.
(3) Incubation Start for Other Birds 3. Function Settings Incubation Start for other birds This function is used when user wishes to incubate other birds which are not memorized in the incubator menu setting. User can change incubation conditions according to needs. MENU ▶ Press MENU button in basic screen. ▶ Select Other Birds by UP/DOWM button and then press ENTER to go to setting.
3. Function Settings (4) Incubation start with PC connection Mode ,QFXEDWLRQ 7HUPLQDWLRQ &KDQJH &HOV )DKU Return to Factory Setting Incubation start with PC connecting mode With this function, you can share incubation process, optimum incubation setting by building a database. ▶ Refer to the PC Software Manual for starting incubation in PC connecting mode.
(6) Incubation conditions reset / How to Set Egg Turning Test / Turn ON, OFF Humidification Function 3. Function Settings Incubation Condition Reset during Incubation ▶ This is used when you want to change incubation setting mode again during incubation. Press MANUAL button during incubation, then Temp. display will blink. If you want to change Temp. reset with UP/DOWN button and then press ENTER to save. Using this method, you can also reset humidity, egg turning angle, and egg turning interval.
(1) Egg Turning Check / Alarm for water supplement / Abnormal High or Low temperatue Alarm / Power Failure Alarm Function 4. Other Functions Egg Turning Check Function ▶ When starting egg turning, animation showed on display with melody. Water Shortage Detecting Function ▶ When water is short, humidification icon is changed Fklfnhq Fklfnhq and water supplement alarm sounds after 5 min. This alarm continues every 30 sec. ##4k <3ȋ ##4k <3ȋ It takes about 1min.
5. Incubation (1) Humidity & Air Maintenance during Incubation / Maintenance after Hatching (2) Dew Condensation Humidity & Air Maintenance During Incubation ▶ When hatching, humidity should be relatively high to prevent the thin membrane from drying out or hardening before hatching. ▶ When hatching, it's recommended not to open the lid often. This is because if you open the lid often humidity will be rapidly decreased and it will take a long time to regain the proper humidity.
6. How to Clean (1) How to Disassemble ▶ Pull out the electric cord from the connecting jack and also take out the plug from the outlet. Don't turn off the power soon after using the incubator, as this may cause a break down due to moisture left inside the main controller.
6. How to Clean (2) How to Clean 4 F9 5F Start the vacuum cleaner to remove the dust as shown on the right and thoroughly shake out the minute dust with a fine brush. F9 5F If the incubator goes through incubations several times, feather, dust, shell, etc. accumulate inside the main body, which may cause a break down, so be sure to clean the product before storage. BH :FC In case the incubator clean status is poor which may cause fan noisy or stopping.
7. Product Information (1) Servicing / Frequently Asked Questions (FAQ) Servicing All our Rcom digital incubators of Autoelex Co., Ltd. are made by precision systems under strict quality control. But occasionally some defective products are found on the way of their distribution. If any problem occurs, then please contact Rcom service center or distributorsin your country. We will do our best to solve the problems, if any, for you.
7. Product Information Troubleshooting CIRCUMSTANCE (2) Troubleshooting If you need detail self diagnosis, please click “self diagnosis” on our website. ITEMS TO BE CONFIRMED SOLUTIONS No signs of power to the incubator. ઔ Check electric cord is properly connected. ઔ Check if there is a power outage. ઔ Check whether the plug is damaged. ઔ Connect the cord again. ઔ Check the main socket with any other electric appliances. ઔ Try to insert to another outlet. Temperature will not go high enough.
7. Product Information (3) Specification 1-1 Name : Rcom USB 20 / Rcom PRO 20 1-2 Model : UX-20 / PX-20 1-3 Supporting Soft : Rcom USB 20 INCUBATION SYSTEM (WINDOWS) Specification Specification Power AC 100~120[V], 50/60[Hz] / 220~240[V], 50/60[Hz] Working Temp. 20 ~ 42.0[ C] 30 ~ 70[%] o Working Humid. Power Consumption Capacity Average. 48[W] 10 ~ 52[EA] Weight 4.5 [Kg] Size (W)500 * (L)410 * (H)160 [mm] Fuse Standard Automatic 250[V] 2.
Rcom USB 20, PRO 20, MAX 20 PART LIST Image P a rt N o Names of goods (*.Compatible) H20-F201-10 H20 Body H20-A202-10 H20-F203-10 H20-A200-10 Image P a rt N o Names of goods (*.
Rcom USB 20, PRO 20, MAX 20 PART LIST Image P a rt N o H20-F237-10 ( Option) H20-F210-10 H20-F233-10 H20-F234-10 ( option) H20-F208-10 H20-F207-10 Names of goods (*.Compatible) Image P a rt N o Names of goods (*.
3DPN JT EFTJHOFE GPS VTFS T FBTZ BOE DPOWFOJFOU VTF *U DBO CF DIBOHFE XJUIPVU OPUJDF GPS JNQSPWFNFOU JO QFSGPSNBODF EFTJHO USFBUNFOU BOE TPGUXBSF FUD www.Rcom.co.kr SELLER MANUFACTURER ú )FBE 0GGJDF %FPLBN +VDIPO (JNIBF ,03&" ú 5& %JSFDU UP TBMFT UFBN _ 0GGJDF ú '"9 ú & .
