User Manual

3.) Installation
I.) Spiral Wrapping:
Use the supplied Spiral Wrapping included with your Ignition to protect the wires from heat
and chafing. Wrap the braided Spark Plug Lead, Hall Sensor Harnesses and Battery
Harnesses.
II.) Mounting:
Mount your Ignition on the engine box if possible. Wrap the ignition in foam to reduce the
effects of engine vibration on the circuitry. You can use the mounting tabs on the ignition
but we recommend using zip ties or Velcro ties to secure it. Do not install your ignition in
the fuselage. Keep the ignition as far away from you receiver as possible and never use
the same power source to run your ignition and receiver jointly.
III.) Connecting the Battery:
The RCGF ignition utilizes the Futaba style plug ends and comes with an additional pigtail
to add to your ignition switch if necessary. Be sure to follow the color coding (Red +, Black
-) when attaching your to your power source and on / off switch to your ignition power
leads. Wrap your battery with foam and mount it as far away from the receiver as possible,
preferably on the motor box.
Note: There are no serviceable parts in the ignition system. Opening the case will
void the engine warranty.
4.) Trouble Shooting your Ignition.
I.) Battery: Check the voltage on your battery and make sure it’s healthy and fully
charged. Insure that the voltage is 6v or less to the ignition.
II.) Connections: Check that all connections are correct from the battery, to the switch, to
the ignition. Use a volt meter on the switch to ensure the ignition is getting power and the
polarity is correct.
III.) Hall Effects Sensor: Ensure that the orientation of the hall sensor is correct with the
orientation of your hub magnet.
5.) Safety Precautions.
Never power the ignition with the plug in the head when you’re working on your engine, it
could fire off!! Always wear a glove when starting your engine!! After turning off your
ignition, be ware that ignitions and still have a charge and fire the motor. Always range
check your model !
(RCGF reserves the right to make any change or to modify this
manual without notice in advance.)
If you need any help, please contact with the nearest RCGF authorized distributor or
dealer.Or you can contact our factory by:
Email: [e-mail]/[e-mail]
Cell : 0086-13516892995
Website : www.zjrcgf.com
MSN: [e-mail]
Skype : Cathrine.Tsang
Yahoo: [e-mail]