Data Sheet

SUB 8006-AS
ACTIVE SUBWOOFER
DESCRIPTION
The SUB 8006-AS is the largest and most powerful active sub woofer in the
professional series.
Featuring two 18” transducers, with 4” inside/outside voice coils, this
cabinet is designed to delivery a serious amount of low frequency. It is a
direct radiating, high output, large-format sub woofer system proven in
complementing high efficiency, full-range loudspeakers. Driver mounting
maximizes cone area and minimizes frontal area, providing acoustical
performance and physical configuration well suited for creating large
subwoofer arrays.
SUB 8006-AS has been designed to extract the greatest efficiency from every
part of the system, resulting in an effortless reproduction of low frequency
transient response. As a self-powered system, the transducers, amplification
and DSP control electronics of the SUB 8006-AS are designed to optimize
performance and maximize its power.
The SUB 8006-AS ‘s efficiently tuned cabinet houses two RCF Precision back-
vented, long-excursion, new high power 18” inch cone drivers, providing a
fast and controlled reproduction of the bass frequency range. Featuring a 4”
inside/outside voice coil to minimize power compression and extend the life of
this product.
The drivers have also been engineered for extreme efficiency, using high-
gauss ferrite magnets for the most powerful magnetic field strength. High
magnetic field strength increases the driver’s sensitivity, which yields greater
output, while keeping heat dissipation requirements within operational
tolerances.
Powered by a 2500W digital amplifier module, Class-D technology, that packs
huge performance operating with high efficiency into a lightweight solution..
It deliver ultra fast attack, realistic transient response and impressive audio
performance. The amplifier features a solid mechanical aluminium structure
which not only stabilize the amplifier during transportation but also assist in
the heat dissipation. The integrated DSP manages equalisation, soft limiter,
compressor and user adjustable settings as deep/boost EQ, Low pass, phase
reverse and a preset for Cardioid setup.
An easy to reach delay knob on the back allows to set the overall delay of the
speaker, in meters, according to its application. 3 status LEDs – Power / Signal
/ Status are provided for monitoring the system
The amplifier features a solid mechanical aluminium structure which not
only stabilize the amplifier during transportation but also assist in the heat
dissipation and, with DSP control electronics and power supply, is integrated
into a single, field-replaceable module mounted in the rear of the cabinet.
The cabinet is constructed of multi-ply hardwood and coated with a textured
black finish. Integral metal grilles lined with acoustical black mesh protect the
cone drivers. Integrated mechanics are for multiple configuration with HDL
20-A.
MAIN FEATURES
• 5000 Watt Peak power - 2500 Watt RMS
• 141 dB max SPL
• 30 Hz - 120 kHz frequency response
• 2 x 18” Woofer
• DSP controlled Input section with selectable presets
• Delay control
• Integrated mechanics for multiple configuration with HDL 20-A
• Baltic birch tour grade cabinet
MAIN APPLICATIONS
• Live sound
• Rental
• Portable PA, clubs, ballrooms, live theatre
• House of worship
• Theme parks
• Music playback and sound reinforcement in small and mid-size venues
• Corporate A/V professionals and sound system hire companies