User Manual

35
SPECIFICATIONS / SPECIFICHE TECNICHE
QPS 10K QPS 6.0K
Amplifier specifications
Amplifier Class: HD HD
Number of channels: 4 4
Power output per channel (@ 2 ohm): 2500W RMS 1500W
Power output per channel (@ 4 ohm): 2200 W RMS 1300 W
Power output per channel (@ 8 ohm): 1400 W RMS 700 W
Power output (bridged @ 4 ohm): 5000 W RMS 3000 W
Power output (bridged @ 8 ohm): 4400 W RMS 2600 W
Frequency Response (-3dB): 20 Hz ÷ 20000 Hz 20 Hz ÷ 20000 Hz
Signal/noise rate (”A” weighted) >110 dB >110 dB
Crosstalk <70 dB <70 dB
Distortion (THD+N) @ 1 kHz nominal power: <0.05 % <0.05 %
Input section
Total number of inputs: 4 4
Balanced: 4 4
Mono: 4 4
Line inputs: 4 4
Line connectors: XLR XLR
Output section
Signal output number: 2 2
Signal output connectors: XLR XLR
Power output connectors: Speakon Speakon
Controls
Configuration: DIP switch, Front panel DIP switch, Front panel
Protections
Cooling: Forced Forced
Short circuit: Yes Yes
Thermal: Yes Yes
DC: Yes Yes
Fuses: Yes Yes
VHF (Very High Frequencies): Yes Yes
Power requirement
Operating voltage: 220-240/115 V~ 50/60Hz 220-240/115 V~ 50/60Hz
Power consumption: 1900 W 1400 W
Standard compliance
CE marking: Yes Yes
Physical specifications
Cabinet/Case Material: Metal Metal
Handles: Included in the front panel Included in the front panel
Color: Black - RAL 9005 Black - RAL 9005
Rack mounting: 19", 2U 19", 2U
Size
Height: 88 mm / 3.46 inches 88 mm / 3.46 inches
Width: 483 mm / 19.02 inches 483 mm / 19.02 inches
Depth: 399 mm / 15.71 inches 399 mm / 15.71 inches
Weight: 15.5 kg / 34.17 lbs 13.7 kg / 30.2 lbs