OWNER’S MANUAL MANUALE UTENTE NXL 24-A NXL 44-A TWO-WAY ACTIVE ARRAYS
EN 1. SAFETY PRECAUTIONS AND GENERAL INFORMATION The symbols used in this document give notice of important operating instructions and warnings which must be strictly followed. CAUTION Important operating instructions: explains hazards that could damage a product, including data loss WARNING Important advice concerning the use of dangerous voltages and the potential risk of electric shock, personal injury or death.
EN 1. SAFETY PRECAUTIONS AND GENERAL INFORMATION WARNING! CAUTION! To prevent the risk of fire or electric shock, never expose this product to rain or humidity. WARNING! To prevent electric shock hazard, do not connect to mains power supply while grille is removed WARNING! to reduce the risk of electric shock, do not disassemble this product unless you are qualified. Refer servicing to qualified service personnel.
EN 2. DESCRIPTION NXL MK2 SERIES - THE NEXT GENERATION OF SOUND The NXL MK2 series sets a new milestone in column arrays. RCF engineers have merged purpose-designed transducers with constant directivity, FiRPHASE processing, and newly added Bass Motion Control algorithms, all driven by a 2100W amplifier.
EN 3. REAR PANEL FEATURES AND CONTROLS 1 PRESET SELECTOR This selector allows to select 3 different presets. By pressing the selector, the PRESET LEDS will indicate which preset is selected. LINEAR - this preset is recommended for all regular applications of the speaker. 2 SPEAKERS - this preset creates the correct equalization for the use of two NXL 24-A or NXL 44-A coupled on a subwoofer or in suspended configuration.
EN 4. CONNECTIONS The connectors must be wired according to the standards specified by the AES (Audio Engineering Society).
EN 5. ACCESSORIES NXL 24-A ACCESSORIES STACKING KIT 2X NXL 24-A POLE MOUNT KIT NXL 24-A Pole mount accessory for stacking a couple of NXL 24-A on a subwoofer. Pole mount accessory for stacking an NXL 24-A on a subwoofer. FLY BAR NX L24-A FLY LINK KIT NXL 24-A Accessory needed for any suspended configuration of NXL 24-A Accessory to link a second NXL 24-A to a flying NXL 24-A straight or angled (two angles are possible: 15° or 20°).
EN 6.
EN 6. INSTALLATION NXL 24-A SUSPENDED CONFIGURATIONS 0° 15° 20° Placing the flat FLY LINK accessory allows the suspension of two speakers in straight configuration. Placing the angled FLY LINK accessory frontwards allows the suspension of two NXL 24-A with an angle of 15°. Placing the angled FLY LINK accessory backwards allows the suspension of two NXL 24-A with an angle of 20°.
EN 6.
EN 6. INSTALLATION WARNING! CAUTION! Never suspend this speaker by its handles. Handles are intended for transportation, not for rigging. WARNING! CAUTION! To use this product with the subwoofer pole-mount, before installing the system, please verify the allowed configurations and the indications regarding the accessories, on the RCF website to avoid any danger and damages to people, animals and objects.
EN 7. TROUBLESHOOTING THE SPEAKER DOESN’T TURN ON Make sure the speaker is switched on and connected to an active AC power THE SPEAKER IS CONNECTED TO AN ACTIVE AC POWER BUT DOESN’T TURN ON Make sure the power cable is intact and connected correctly. THE SPEAKER IS ON BUT DOESN’T MAKE ANY SOUND Check if the signal source is sending correctly and if the signal cables are not damaged. THE SOUND IS DISTORTED AND THE OVERLOAD LED BLINKS FREQUENTLY Turn down the output level of the mixer.
IT SPECIFICATION / SPECIFICHE NXL 24-A MK2 NXL 44-A MK2 Frequency Response: 60 Hz ÷ 20000 Hz 45 Hz ÷ 20000 Hz Max SPL @ 1m: 132 dB 135 dB Horizontal coverage angle: 100° 100° Vertical coverage angle: 30° 25° Compression Driver: 1 x 1.4'' neo, 3.0'' v.c 1 x 1.4'' neo, 3.0'' v.c Woofer: 4 x 6.0'' neo, 1.5'' v.c 3 x 10'' neo, 2.5'' v.
IT NXL 24-A DIMENSIONS / DIMENSIONI 28
RCF S.p.A. Via Raffaello Sanzio, 13 - 42124 Reggio Emilia - Italy Tel +39 0522 274 411 - Fax +39 0522 232 428 - e-mail: info@rcf.it - www.rcf.
