User Manual

9
ENGLISH
Terminal strip connection (WMF 33EN only)
The ceramic terminal strip in on the back of the wall-mount
support bracket.
The two terminals allow to connect both input and output
cables (to link other speakers in parallel).
Applicable wire section: from 1 mm² to 4 mm².
Connect both the positive
+
wires and the negative
-
INSTALLATION
WARNING: MAKE SURE ALL SPEAKERS ARE INSTALLED IN A STABLE AND SECURE WAY IN ORDER
TO AVOID ANY CONDITIONS THAT MAY BE DANGEROUS FOR PERSONS OR STRUCTURES.
ENSURE THE SUPPORT SURFACE (WALLS, CEILINGS, ETC.) HAS THE NECESSARY MECHANICAL
CHARACTERISTICS TO SUPPORT THE SPEAKER WEIGHT.
BEFORE INSTALLING EVERY SPEAKER, CAREFULLY CHECK ALL COMPONENTS TO BE USED AND MAKE
SURE THERE IS NO DAMAGE, DEFORMATION, CORROSION AND/OR MISSING OR DAMAGED PARTS THAT
COULD REDUCE THE SAFETY OF THE INSTALLATION.
MF 33EN
1
Connect the speaker as previously
described in the ‘Connection’ manual
section.
2
Make a 442 mm x 93 mm hole
in the false ceiling tile.
3
Fully insert the speaker into the hole.
3
2
442 mm
93 mm
-
1