User Manual

8
ENGLISH
Terminal strip connection (MF 33EN only)
Remove the rear protective cover having the two cable guides (by unscrewing
its two screws) to access the ceramic terminal strip.
The two terminals (‘70/100V’ and ‘0’) allow to connect both input and
output cables (to link other speakers in parallel).
Applicable wire section: from 1 mm² to 4 mm².
Insert the input cable through one of the two cable guides of the rear
protective cover.
Connect the positive wire to the ‘70/100 V’ input and the negative wire to
the ‘0 V’ input.
If necessary, connect in the same way the output cable (passing it through
the other cable guide of the rear protective cover) to link other speakers in
parallel.
100/70 V
0
70/100 V
0 V
NC