User Manual

ENGLISH

RCF S.p.A. thanks you for purchasing this product, which has been

designed to guarantee reliability and high performance

DESCRIPTION

MF 33EN and WMF 33EN are two-way speakers in compliance with EN 54-24

standard.

MF 33EN is the model for ush mounting, WMF 33EN for surface wall mounting.

Main features:

- Two 3” fullrange loudspeakers, 1” dome tweeter

- ABS housing

- Equipped with internal transformer for 100 / 70 V constant voltage lines, their

input can also be set to ‘8 Ω’ for low impedance connections

- Power selection is carried out by rotating the front selector (with a screwdriver),

power taps: 40-20-10-5 W at 100 V, 40-20-10-5-2.5 W at 70V, 40 W at 8 Ω

- Ceramic terminal strip for the cable connection

- Thermal fuse (placed in the ceramic terminal strip) that prevents damages to the

audio line due to heat on the speaker

- The front protection grille is xed to the speaker thanks to 4 magnets

- Colour: black.

WARNING: SPEAKER CONNECTIONS SHOULD BE ONLY MADE BY QUALIFIED AND EXPERIENCED

PERSONNEL HAVING THE TECHNICAL KNOW-HOW OR SUFFICIENT SPECIFIC INSTRUCTIONS TO ENSURE

THAT CONNECTIONS ARE MADE CORRECTLY AND PREVENT ANY ELECTRICAL DANGER.

TO PREVENT ANY RISK OF ELECTRIC SHOCK, DO NOT CONNECT SPEAKERS WHEN THE AMPLIFIER IS

SWITCHED ON. BEFORE TURNING THE SYSTEM ON, CHECK ALL CONNECTIONS AND MAKE SURE THERE

ARE NO ACCIDENTAL SHORT CIRCUITS.

THE ENTIRE SOUND SYSTEM SHALL BE DESIGNED AND INSTALLED IN COMPLIANCE WITH THE CURRENT

LOCAL LAWS AND REGULATIONS REGARDING ELECTRICAL SYSTEMS.

MAKE SURE ALL SPEAKERS ARE CONNECTED IN PHASE TO ENSURE A CORRECT SOUND

REPRODUCTION.

Remove the front protective grille to have access to the power selector

(a rotary switch).

CONNECTION

MF 33EN