User Manual

4
ENGLISH
AVVERTENZE
PER LA SICUREZZA
IMPORTANT NOTES
SAFETY AND OPERATING
PRECAUTIONS
IMPORTANT NOTES
Before connecting and using this product, please read this user manual
carefully and keep it on hand for future reference. This manual is to be
considered an integral part of this product and must accompany it when it
changes ownership as a reference for correct installation and use as well as
for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and
/ or use of this product.
SAFETY AND OPERATING PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with special
attention, as they provide important information.
2. Speaker lines (amplier outputs) can have a sufciently high voltage (i.e.
100-70 V) to involve a risk of electrocution: never install or connect speakers
when the line is alive.
3. Make sure all connections have been made correctly and the input voltage
of every speaker is suitable for the amplier output.
4. Protect speaker lines from damage. Make sure they are positioned in a
way that they cannot be stepped on or crushed by objects.
5. Make sure that no objects or liquids can get inside speakers, as this may
cause a short circuit.
6. Never attempt to carry out any operations, modications or repairs that
are not expressly described in this manual.
Contact your authorized service centre or qualied personnel should any of
the following occur:
- A speaker does not function (or works in an anomalous way).
- A cable has been damaged.
- Objects or liquids have got inside a speaker.
- A speaker has been damaged due to heavy impacts or re.
7. Should a speaker emit any strange smell or smoke, remove it from the line
after having immediately switched the amplier off.
8. Do not connect speakers to any equipment or accessories not foreseen.
For suspended installation, only use the dedicated anchoring points and do
not try to hang speakers by using elements that are unsuitable or not specic
for this purpose.
Also check the suitability of the support surface to which the product
is anchored (wall, ceiling, structure, etc.) and the components used for
attachment (wall plugs, screws, brackets not supplied by RCF, etc.), which
must guarantee the security of the system / installation over time, also
considering, for example, the mechanical vibrations normally generated by
transducers.
9. RCF S.p.A. strongly recommends that speakers are only installed by
professional qualied installers (or specialised rms) who can ensure a
correct installation and certify it according to the regulations in force.
The entire audio system must comply with the current standards and
regulations regarding electrical systems.