Data Sheet

L18P400
WOOFER
DESCRIPTION
Incredibly linear frequency response
characteristics, extreme high power handling
while generating the lowest harmonic
distortion of any comparable 18-inch
trasducer wtihin its application range.
The L18P400 uses a fibre loaded cone
assembly along with a high excursion triple
roll,constant geometry surround. A fully
optimised T-pole design generate the
minimum amount of flux modulation. The T-
pole also features RCf Precision's spaced gap
demodulation technology, progressively
braking the voice coil, providing a much
smoother transition for the moving mass as it
reachees its maximum excursion limits.Forced
air venting system.
FEATURES
• 4-inch, fiberglass inside/outside copper voice coil
• 2000W continuous program power handling
• 97.5 dB Sensitivity
• 25 Hz – 1 kHz Frequency range
• Aluminum demodulation ring
• Forced air ventilation and 15mm top plate for minimum power compression
• Dual spider design with silicon based dampening control
• Triple roll surround and corrugated straight cone geometry
DATASHEET