Data Sheet

WOOFER

L18P300

In production for over 10 years, the L18P300 is an industry standard. The sturdy

magnetic unit, with 15 mm thick plates and specially designed suspensions ensure

an excellent control of amplitude of over +/- 12 millimetres. The special cooling

system with forced air ventilation offer a great heat dissipation and the minimum

levels of power compression available on the market.

Voice coil construction, suspensions and cone materials are upgraded in order to

withstand up to a Kilowatt RMS power.

Professional Low Frequency Transducer

The L18P300 finds its best application in both bass reflex and band pass systems.

Its capacity to reproduce extremely low frequencies along with extraordinary

definition make it a no compromise woofer in its category, ideal for both live and

recorded music.

Applications

4-inch, fibreglass inside-outside copper voice coil

2000 Watt continuous program power handling

97 dB Sensitivity

35 Hz - 1 kHz Frequency range

Forced air ventilation and 15 mm top plate for minimum

power compression

Dual spider design with silicon based dampening

control

M-roll surround and exponential cone geometry

Features

100035

20 100 1.000 10.000 20.000

PART NUMBER 11185016

PAGE 1
WOOFER L18P300 Professional Low Frequency Transducer In production for over 10 years, the L18P300 is an industry standard. The sturdy magnetic unit, with 15 mm thick plates and specially designed suspensions ensure an excellent control of amplitude of over +/- 12 millimetres. The special cooling system with forced air ventilation offer a great heat dissipation and the minimum levels of power compression available on the market.
PAGE 2
General Specifications 8 x ø 8 mm holes to 45° on 436 mm and on 442 ø 460 mm 15 mm Nominal Diameter Rated Impedance Program Power 1 Power handling capacity 2 Sensitivity 3 Frequency Range Effective Piston Diameter Max Excursion Before Damage (peak to peak) Minimum Impedance Voice Coil Diameter Voice Coil Material Voice Coil Winding Depth Number of layers Kind of layer Top Plate Thickness Cone Material Cone Design Surround Material Surround Design 460/18 8 2000 1000 97 35 - 1000 380/15 40/1.6 6.