User Manual

8
EN
SETTING THE POWER WHEN CONNECTED TO 100 / 70 V CONSTANT VOLTAGE LINES
If speakers are connected to a constant voltage line, set the selector to one of the positions from 1 to 5 (70 V) or from 1 to 4 (100 V) to choose
the power rate (according to the line voltage)�
CMR 50T W
POSITION 1 2 3 4 5 6
70 V 2,5 W 5 W 10 W 20 W 40 W
8 Ω
100 V 5 W 10 W 20 W 40 W N�C�
CMR 60T W
POSITION 1 2 3 4 5 6
70 V 5 W 10 W 20 W 40 W 80 W
8 Ω
100 V 10 W 20 W 40 W 80 W N�C�
WARNING!
- DO NOT select position 6 (8 Ω) (as this may damage the speaker and the amplifier)!
- DO NOT select position 5 when linked to a 100 V line!
- The speaker input voltage (Vd) shall correspond to the amplifier output voltage (Va)�
- The sum of nominal power values (Pd x n) of all speakers connected to the line shall not exceed the amplifier power (Pa)�
3. CONNECTION AND POWER SELECTION