User Manual

7
EN
3. CONNECTION AND POWER SELECTION
WARNING! Speaker connections should be only made by qualified and experienced personnel having the technical
know-how or sufficient specific instructions to ensure that connections are made correctly and prevent any electrical danger�
To prevent any risk of electric shock, do not connect speakers when the amplifier is switched on� Before turning the system
on, check all connections and make sure there are no accidental short circuits�
The entire sound system shall be designed and installed in compliance with the current local laws and regulations regarding
electrical systems�
Make sure all speakers are connected in phase to ensure a correct sound reproduction�
CMR 50T W and CMR 60T W can be either connected to 70 V / 100 V constant voltage lines or used as low impedance speakers (8 Ω)�
Remove the front grille (fixed with magnets and with a safety cord) to access the power rotary switch (6 different settings)�