User Manual

11
EN
5. INSTALLATION
WARNING! Make sure all speakers are installed in a stable and secure way in order to avoid any conditions that may be
dangerous for persons or structures� Check that the false ceiling has the necessary mechanical characteristics to support the
speaker weight without any risk of falling�
1� Drill a circular hole having a diameter Ø 260 mm (10�24”) in the false ceiling at the point chosen for the speaker installation�
2� Connect the speaker as previously described in the 'Connection' manual section�
3� Insert the speaker completely into the false ceiling hole�
4� Tighten (clockwise) the 3 screws that rotate the respective 3 locking plastic clamps to fix the speaker to the false ceiling� Note: to
remove the speaker from the false ceiling (if necessary), screw counterclockwise�
5� Mount the speaker front grille� The grille is fixed with magnets and is equipped with a safety cord (included), which must be hooked into
one of the slots on the tweeter horn�
ø 260 mm (10.24")