User Manual

8
89100 THE GRAND, Charge Bar
POWDER CHARGE WEIGHT IN GRAINS
GRAINS 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
Accurate Arms Nitro 100 420 432 444 456 468
DuPont 700-X 402 414 429 441 453 465 486 498
DuPont PB 366 390 402 390 426 435 447 456 465 474 486
DuPont SR 7625 381 414 402 414 426 438 444 453 462 474 486
DuPont-800-X 372 390 402 423 429 438 447 459 468 480
DuPont SR4756 366 408 426 435 447 459 471 480
DuPont MR4227 366 390 408 414 420 426 435 441 447 453 462 468 474 480 486 498
American Select 423 432 447 456 468
Alliant Red Dot 423 438 453 468 480 498
Alliant Green Dot 390 420 435 447 456 468 480
Alliant Unique 354 381 414 423 435 444 453 465 474
Alliant Herco 381 414 426 438 450 462 471 498
Alliant Blue Dot 366 372 381 390 396 408 414 423 435 441 447 459 468 474
Hodgdon Clays 429 441 456 468
Hodgdon International 390 402 414 423 435 447 459 471
Hodgdon Universal 354 366 390 402 420 429 438 447 456 468 480
Hodgdon HS-6 381 390 396 402 408 423 429
Hodgdon HS-7 354 402 408 414 420 429 435 441 447 453 459 465 471
Scot 1000 447 456 468 480
Solo 1250 420 432 444 456 468 480 498
Winchester 540 366 381 402 408 414 423 429 435 441 444 450 459 465 471
Winchester 571 390 396 423 429 438 444 450 456 462 468 474 480 486
Winchester Super Target 429 438 450 459 471 480
Winchester Super Lite 354 372 381 390 402
Winchester Super Field 420 426 432 441 450 456 462
HOW TO SELECT BUSHINGS FOR HALF GRAIN CHARGES:
Powder bushings are identified by numbers that correspond to
the size of their inside diameter. (For instance, the inside
diameter of the #456 bushing is .456 inches.) Bushings for
powder charges in half-grain increments can be calculated from
this chart. Simply “split the difference” between the two even-
grain bushings, and select the bushing nearest the result.
Example: To find the bushing for 18 1/2 grains of Hercules Red
Dot powder, note that bushing #468 gives a charge of 18 grains
and that bushing #480 gives 19 grains. Split the difference
between 468 and 480, and the result is 474. Thus, the correct
bushing for 18 1/2 grains of Red Dot is bushing #474.
All charges listed on this chart are an average of several loads,
weighed following the complete reloading cycle. Powders used
in establishing these loads were from ballistic samples supplied
by the manufacturer or sealed tins of recent manufacture.
Charges may vary slightly due to operator's technique and/or
powder variables.
THE GRAND, Powder Bushings
Part Number Bushing# Part Number Bushing# Part Number Bushing# Part Number Bushing#
89111 354 89119 408 89127 438 89135 462
89112 360 89120 414 89128 441 89136 465
89113 366 89121 420 89129 444 89137 468
89114 372 89122 423 89130 447 89138 471
89115 381 89123 426 89131 450 89139 474
89116 390 89124 429 89132 453 89140 480
89117 396 89125 432 89133 456 89141 486
89118 402 89126 435 89134 459 89142 498
THE GRAND, Lead Shot Bushings
For Field Loads #6
’ s
Compensates for tighter packing
of smaller shot size.
Part Number Bushing Description
89170 7/8 oz.
89171 1 oz.
89172 1-1/8 oz.
89173 1-1/4 oz.
89174 1-3/8 oz.
89175 1-1/2 oz.
THE GRAND, Lead Shot Bushings
For T
arget Loads
Calibrated to measure maximum legal loads
for trap and skeet shooting.
Part Number Bushing Description
89188 7/8 oz. #9
89189 1 oz. #7-1/2
89190 1 oz. #8
89191 1-1/8 oz. #7-1/2
89192 1-1/8 oz. #8
89193 1-1/8 oz. #8-1/2
89194 1-1/8 oz. #9
INTERCHANGEABLE
CHARGE BUSHINGS
For use with THE GRAND
shotshell reloader.
Designed so shot and
powder bushings cannot be
accidentally reversed in the
charge bar. The bushings
make it easy to change
from one load to another.