Owner manual

After adjusting the die, tighten this setscrew
to hold the proper setting.
A label is provided with each die box for
recording your favorite loads.
tion by lightly tightening the setscrew. The die will then hold the proper set-
ting and may be reused in the same press without readjustment.
Competition Die Sets are furnished with an extended shell holder
where needed for reloading short cases. The competition extended shell
holder is only used with the competition seater die. A standard RCBS
shell holder should be used with the competition sizer die.
PACKAGING
All RCBS Dies are packaged in convenient plastic storage boxes spe-
cially designed by RCBS to protect your dies in shipment and during stor-
age. A unique cradle holds the dies firmly in place to prevent damage
and rolling around. Each box contains a label for recording your favorite
loads and can be mounted on the inside lid for quick reference. A label
on the outside of the box lists the die caliber for easy identification.