USER'S GUIDE TV/VCR CO
Important Information To reduce the risk of fire or shock Eazard, do not expose this product to rain or moisture, WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL, ,& This symbol _ndicams voltage _ inside I CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Table of Contents Important Information Warning Cautions Note to Cable '1%"Installer i i i Product i Setting Registration Up the __ TV/VCR Stariup Unpack your TV/VCR Remote Control Inset* Batteries and 2 in Remote 2 Place Your TV/VCR on a Stable Surface Connect Antenna 3 or Cable '1%' System Plug in the TV/VCR Turn On the TV/VCR 3 3 3 Select the Language (t:_coje un Idioma/Choissisez une langue) 3 Put ChanneN into Memo W (Auto Channel Search) 4 Set the Signal Type {optional} Add or Re
Startup 1. Unpack the TV/VCR and remote control Contact your dealer tf your remote co_tro| is missing. _W ® 2.
Startup 3. Place your 4. Connect TV/VCR antenna on a stable or cable-TV Connect 5. Plug in the a home antenna surface system or a cable '1%' system. Details o_ _ges TV/VCR Plug the power cord into the wall o_let, the plug with the wide slot in the outlet. completely. 6.
Startup 8. Put Channels into Memory (Auto Channel TViVCB Search) A, Press MENU on the remote to display the |V/VCR MAIN MENU, B, Press 5 to display the SETUP menu, C. Press 1 to start AUTO CHANNEL SEARCH, I Auto O. Allow the 'KV/VCR to search for all channels, Pressing any buttons during Auto Channel Search will stop the search and only some channels will be in the TV/VCR's memory, When the search is finished the TViVCR will automatlcal|y tune to the first channel in the channel memo W list.
Startup 11. Set the Time and Date (Clock) TViVCR To set the clock: MENU, A, PressMENUontheremotetodtsplaytheTVWCRMAIN TIME B, Press 2 to display the TIME menu, C, Press 1 to display the SET TIME and DATE screen, D. Use the number buttons I buttons Set Time and Date SET TIME ARD DATE Time ...... Dste --l--l-- on the remote to enter the time. • Press 0 before i; 0 is added automatically before all other numbecs. Press 1 for AM or 2 for PM.
Buttons This remote has a Light O feature that lets you use the remote in a dimly lit or dark room, The Light button glows in the dark. Pressing this button lights some of the most commonly used remote buttons. The buttons remain lit as long as any button is pressed within approximately four seconds of the last button pressed. Tim light times out if no buttons are pressed, which conserves the life of your batteries. If the light times out, simply press the Light button to turn it on again.
Buttons Numbers (0 through Select a channel two numbers. 9) up to 99 by pressing Select a cable channel over 99 by pressing and holding 1 until "1 appears on the screen. Then press the other two numbers. SKIP/SEARCH Operates Commercial Skip during 'KV viewing. (This only works when there ts no tape in the TV/VCR.) Displays INDEX,ZERO, and BLANK search screens when tape is inser*ed in the 'IN_iVCR. Operates Commercial Scan by advancing tape (30seconds during playback. OFF Turns the TViVCR off.
Using the On-Screen TVNCR Features Displays When you change channels, adjust volume, or use a VCR feature, on screen displays appear to let you know the status of the TV/VCR. To Call Up On-Screen Displays 1. Press DISPLAY to display the function, counter, date, time, and tape speed. time [fyou do not press DISPkAY again, these display_ will time out and disappear. 2. Press DISPLAY again: • No tape in 'I_iVCR: Display_ are removed. • 'rape in 'I_.
Using Closed the TVNCR Features Captioning The closed captioning feature dtsplay_ the audio pmtion of a program as text on the TV screen. 'IRis is useful to hearing impaired or anyone who wants to watch a program without sound. There are four b'pes of closed captions: Caption 1, Caption 2, Text 1 and Text 2. Caption i display_ the gul! translation of the prima W language in your area. Caption 2 may be used as a second source for secondaLv languages.
Using Sleep the TVNCR Features CM 0E Steep Timer Timer The sleep timer atttomattcal[y turns the TViVCR off after 30, 80, 90, or 120 minutes. 1. Press SLEEP on the remote to select 30, 60, 90 or i20 minutes. 2. To cancel the sleep timer, press SLEEP until the timer disappears. You can 1. Press 2. Press 3. Press 4. Press 5. Press 6. Wake-Up also access the sleep timer through the menu system. MENU on the remote m display the TV/VCR MAIN MENU. 2 to display the TIME menu.
Using the TVNCR Parental Controls and Features V-Chip The Parental Controls menu allows y-ou m progr_n children cannot see cer*atn programs. your TViVCR so th_ '[he First three choices in the Parental Control_ menu involve a feature inside your TV/VCR called VChtp which allows you to "block" TV programs and movies based on violence, sex, or other content you may believe children should not view'. In other words, it let_ you program your TV so it will not display certain programs.
Using Setting the TVNCR TV Rating Features Limits TV/VCM 1. Prass MENU on the remote to d_play the TWVCR MAIN MENU, 2. Prass 4 to display PAREN [AL CON l ROLS. 3. Prassl todtspiay 4, theV-CHIP l 3 TV RAIlNG LIMI! screen. MAIN PARENTAL Use the number buttons 1-7 to change the status of a TV program rating, Remember: Once you have set your limits, you must lock yotn' s_tem in order to aclivaie blocking.
Using the TVNCR 3, Press 2 to change the rating status from View (V) to Block (B), The status for this rating and all higher ratings automatically changes to Block (B) {indicated l_y the rating limits in the rating status area turning red). Note that all associated content is also automatically blocked. 4. Viewing Features Press MENU to exit and return to the PARENrAL menu, Age-Based Ratings 1, Determine 2. Press 1 to scroll to the rating, such as TV 14, whose status is Block.
Using Viewing the TVNCR Specific Features Content V-CHIP Themes After you block spec_c con_nt themes, you have the option of going back and changing some of the content themes back to View ('4), 1. Determine the rating you want to change to View (V). 2. Continuously press1 untilthe rating status corresponding wtth the content theme{a} you want to change appears on screen, 3.
Using Viewing the TVNCR Movie Features Ratings A_er you block movie ratings, you have the option of going back and changing some of the rating statuses back to View V-CHIP 1. Determine the movie ratings you want to change to View. 2. Continuously press 1until the ratlngyou want to change appears as the rating. RR X RC-I? R 3. Press 2 to change the status from View to Block.
Operating To Play Instructions a Tape Safety Tab Insert a tape in the TV/VCR. 'Ihe TViVCR automatically turns on. The tape automatically begins m play if the safet_y tab on the cassette has been removed and the Auto Play feature has been turned on. 2. Press PLAY, if necessary. The word screen, PLAY and the time counter appear on the [f necessary, while the tape is playing, press TRACKING + or on the remote or CHAN up or down on the TViVCR to remove any streaks from the picture.
Using the Playback Features Pause This feature pauses the tape during playback and allows you to examine the detalls of the scene. Pause works best with tapes recorded in SLP speed, 1. Press PAUSE on the remote during the action. playback to pause The 'I_iVCR wi|l automaticai|y switch from pause to stop after a few minutes to prevent tape wear, 2, Frame Press PAUSE or PLAY to return to normal playback, Advance Frame advance legs you view" one frame at a time while in the PAUSE mode.
Using the Playback Automatic Features Tracking The TViVCR has automatic tracking which adjusts the picture whan playing a tape that was recorded on another VCR. Automatic tracking is turned on whenever a tape is inserted or the 'rV/VCR's power is turned on. Manual Tracking Occasionally, you may need to manually adjust tracking on a tape recorded on a different VCR or camcorder. Tracking is used when playing a tape. has no effect during recording.
Using Auto Play the Playback Features Feature This feature enables the TViVCR playing a tape when it is inserted. tape must be removed.) 1.
Using Index the Playback Features Search The TV/VCR automatically records index marks on the tape each time you begin recording. During playback you can locate the program you want to play by the number of"index marks. Your TV/VCR has two index playback features. You can select a specific index number or search by scan and plat . To Select Scan and Play Index Playback % [nser* the prerecorded Z tape and press STOP.
Using Zero the Playback Features Search This feature allows you to quickly remm to a time counter reading of 0:00:00. This is especially convenient when you want to watch a segment of the tape several times. 1. Insert the prerecorded tape and press STOP. 2. Press DISPLAY twice to display only the time counter. 3. Use PLAY, FF, or R_EWto locate the start ofthe want to repeat. 4. Press CLEAR to reset the time counter 5.
Recording Recording Features Speeds Press SPEED to select a recording speed, Cassette SP Td20 2H_
Types of Recordings Your TViVCR provides following sections: Bask which are explained in the Recording Timer Recording Copying How ways to record Recording Express Basic different and Editing Tapes Recording to Make a Recording 1. [nsetl a tape with safet:y tab in place, 2. Press SPEED m select a recording speed, The tape speed indicator appeam, 3.
Express Recording Express recording lets you record up to four hours or to the end of the tape without programming the timer, You can begin recording immediately. '['he TViVCR wiU stop automatically at the end of the recording, How to Use Express Recording 1. Insert a tape with safely tab in place, '['he TViVCR will turn on. 2.
Timer Recording Timer recording legs you program the TViVCR to record up to eight different programs. T_Ls is useful ffyou plan on being away- from home for a long period of time. Before setting the timer, make sure that the clock is set correct[y. Setting a Timer Recording 1. Press MENU to display the TWVCR MAIN MENU. 2. Press 3 to display the TIMER RECORDINGS 3. Press 1 to Create a New Program, 4. Press menu. 1, 2, 3, or 4 to select the t:ype of program.
Timer Recording Checking or Clearing Timer Recordings 1, Press MENU on the remo_ to d_pl_ MAIN MENU, the TWVCR 2. Press 3 to display the TIMER RECORDINGS menu. 3. Press 2 m Review Existing Progs. (programs), 4. Press CLEAR to erase a program, 5. Press MENU to review" the next program in sequence. After you have reviewed all of your programs press MENU to exit, Stopping A Timer Recording 1.
Copying Operating and Editing Instructions (Refer to hookup on page 30.) Use another the TV/VCR rc_rding rgrali_ of I#[e_l_n actd o_her _iLay In f_ n_ of o_l_'r_, upon pro Tapes VCR or camcorder as the playback as the recording VCR. VCR and 1. 'Turn on the VCR or camcorder 2. Press O0 on TV/VCR's remote to select the line input (VIDEO1 or VIDEO2). Pressing O0 once tunes the 'IN'/VCR to the AUDIO/VIDEO1 input jacks on the real' of the "PV/VCR.
Front Panel Tape Compartment Remote Sensor AUDIO IN and VIDEO IN Jacks Receives audio and video signal8 from another component, like a VCR or camcorder when it is connected to thesejacks. 're select these front panel jacks, press 00 twice to display VIDEO2. Remote Se_sor Receives signals from the remote, Aim remote at this sensor with no o/_iects between them, REW (Rewind) Rewinds the tape when the 'IV/VCR is stopped. Searches the picture in reverse during playback.
Back Panel A_IE_NA_ IN FROM ANTENNA Jack Receives the signal from an antenna or cable system. VIDEO and AUDIO INPUT Jacks Receive signals from another component, such _ a VCR or camcorder, when it is connected to these jacks. To select these back panel jacks, press {30once to display VIDEQ1. Choosing Answer the a Hookup questions 1. to choose How does Choose one the your answer A. Dipole antenna B. Outside antenna C. Cable System 2.
Connect Antmma or Cable System Without a Cable Box A. Dipole Antenna Dipole Antenna Follow these steps to connect a dipole antenna m your TViVCR, Do not connect a dipole antenna ffyou plan to connect a different t:ype of indoor or outdoor antenna or cable system, 'INts connection mgy require additional accessories not provided, 1, Insert the antenna base into the slot on the back of your 'rv/_CR, 2. Connect the twin lead ante_llla to the screw antenlla adapter.
Connect a Cable System VtFd lla Cable Box A. Cable Box Unscramble I, Commct Required to All Channels l_I CaI31efrom Cable SysMm as shown. Cable Rox Th_s co[_nection may re_uireaddit(onz_{ 2. Plt_g in power cable box. cords of ]_]]VCR 3. 'I ttrn to pages 25 for "Setting ,I,VcN_CR.,, and Up the Coaxial Cable Back of fWVCR B. Cable Box Unscramble Channels 1. Coll_]ect :2 Required to Premium Cable item Cable System Only as shown, T}ds connection rel]ubes additional ac{.
Connect a VCR or Camcorder A. VCR for Copying 1, Connect for Copying Tapes Tapes as $tlowll, VCR (Playback Only) '["[I[5cot _t_,Etiorl reqLl ires add t[iona[ accessories not provided. 2. Plug in powm' TVNCR. cords of VCR and g_A!}_ 3, Turn to page 27 for "Copying Editing Tapes," AUD_ 1 Vi_EQ and Press 00 (m the t_,more !o select the line (audio/video) _iputs oil the TV/VCR to receive the signal from tile VCR.
Trouble Checks Sometimes problems can be easily solved by checking a few"basic things. Check below" before you call for help or take your TViVCR to an Authorized RCA VCR Servicenter. Problem Solution No power • Plug TV/VCR into an operating outlet. • Check connections. • Make sure the wall outlet is not controlled by a wall switch. 'I_!VCR does not respond to remote • Aim remote at TViVCR's remote sensor with no objects betwean them. • Change batteries and make sure they are properly installed.
Trouble Checks Problem Solution Clock shows TVIVCR incolT_ makes time or date noise when stopped Wil! not attto channel chamlels Cammt • Power interruption, TIMER REC indicator flashes on front of TV/VCR. .' Clock was not set accxLrately (check AM/PM and date), Seepage 5. * TViVCR is removing tape from head_, This is normal. The head c_linder inside the 'I%'iVCR wiil continue to rotate for a few minutes alter you put the VCR in the stop mode. search active * Check antenna or cable connections.
Cleaning the TVNCR Turn offthe TV/VCR before cleaning. You can clean the TV/VCR as required by using a soft cloth or the dusting attachment of your vacuum cleaner. Be sure to occasionally vaccuum the ventilation slots in the cabinet to help assure adequate ventilation. To clean the TV/VCR screen, use a soft cloth dampened with a diluted soap and water mixture. Do not use furniture polish on the 'l%'/VCR cabinet or screen.
Limited What Warranty your warranty covers: A_ For how long after de_ your in material or worMnanshtp. purchase: NineW day_ for ;_¢r charges, One _ar for par_. Two years for picture tube. _'be wa_anEv period for rental uni_ beans wt_ the first rental or 45 days from date of shipment to the rental flrm_ whichever comes first,) What we will do: Pay any Authorized RCA VCR Service Center the labor charges to repair your 'rVtVCR.
Index ADD/REMOVE CHANNELS Menu .............. Adding Channels to Memory .................. Adiusting the Picture ......................... Adjusting Volume ........................... Age based Ratings Block ................................. Defined ............................... View. ................................. 4 4 8 5 12 i1 13 Antenna Symtem, Connecting ................. 30 AUDIO/VIDEO IN Jacks ........ 23,24,25,27,28,29,32 AUTO CHANNEL SEARCH Menu .............. 4 Auto Play Feature ..........
Index Number Buttons ............................. 7 On Screen Display_ .......................... 8 Operation Express Record ......................... 24 Picture, Adjust .......................... 8 Play a '['ape ............................ i(3 Program Channel Memor3, ................ 4 Record a Program ...................... 23 Set the Sleep Timer ..................... i0 Set the Time and Date (Clock) ............. 5 Set the Wake up Timer .................. l0 Timer Record ..........................
Index 1V/VCR MAIN MENU ..... 3,4,5,9,10,19,22,2325,26 TViVCR Setup ............................. 25 'T}'pes of Recordings ......................... 22 Unlock Parental Controls .................... 15 Unrated Programs, Block/View. .............. 15 VChip Defined ............................... 1i Movie Ratings ....................... i415 TV Ratings .......................... i214 Unrated Programs ...................... 15 VCR, Connecting to TViVCR ................. 32 VIDEO/AUD!O INJacks ..........
For your nearest Authorized Servicenter call tel! free in the USA. 1800-3361900 Canadian Your Consumers toll free English: French: numbers ..... are: i800-522-0338 1800-522-0445 If your product needs service, please contact your dealer or the nearest servicenter from the Yellow"Pages. Please do not send any products to the Indianapolis address listed in this manual or on the carton. 'IRis will only add delays in service for your product.
