Manual

Using the "T NCR% Foaturos
- OR -
To Select a Specific Index Number for Index Playback:
1. Insert the pre-recorded tape and press STOR
2. Press SKIP/SEARCH on the remote to display the IND_SEA1,'CHscreen.
3. Use the nmnber buttons (0-9) on the remote to enter the nmnber of llle
index mark for which you want the TV/VCR to search.
4. Press FP to search forward or REW to search in reverse.
When the TV/VCR locates llle index mark, it will begin playback.
When using index playback, llle following index marks may be skipped by
the "lW/VCR:
• The mark closest to the cmxent location on the tape.
• The mark at the beginning of a recorded segment that is five minutes
or less.
• The mark at the beginning of llle tape.
Zero Search
This feature allows you to quickly return to a time counter reading of 0:00:00.
This is especially convenient when you want to watch a segment of the "tape
several times.
1. Insert the pre-recorded tape and press STOP.
2. Press DISPLAY twice to display only the time countei:
3. Use PLAY, FF, or REW to locate the start of llle segment you want to repeat.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape and press STOP when you reach the end of the
segment you want to repeat.
6. Press SKIP/SEARCH twice to display the ZERO S_I,'CH screen. The
current time counter is displayed.
7. Press REW or FF to relurn to 0:00:00. The tape rewinds or fast forwards to
llle 0:00:00 and begins playing.
Blank Search
The TV/VCR will search _r blank portions of the tape that are more _an six
seconds in length.
1. Insert the pre-recorded tape and press STOP.
2. Press SEARCH on the remote three times to display the BLANK S_I,'CH
screen.
3. Press FF to begin searching for a segment that is at least six seconds of
blank tape.
4. Press STOP to stop Blank Search.
28 Chapter 2