AUDIO/VIDEO RECEIVER User's Guide

8
Operating the Receiver
If the Memory indicator on the
display turns off before you
preset your station selection,
press PROGRAM again.
If the receiver is disconnected
from its power source, the preset
stations are maintained in
memory for up to 7 days.
Tuning the Receiver
1. Push the AM/FM button to activate the tuner.
2. Press the AM/FM button again to select the AM or
FM band.
Tuning
Press the FF button to move up the AM or FM band.
Press the REW button to move down the AM or FM band.
Auto Tuning
Use the SEEK feature to automatically search for stations of
sufficient strength.
Press INPUT•SEEK. “SEARCH” appears in the display.
Beginning at its current frequency, the tuner finds and stops
on the next station whose frequency is strong enough to be
received. To continue the search, press INPUT•SEEK again.
Storing Stations in Memory
You can store up to 30 AM and FM stations. These stations can
be stored in random order. Use the convenient Preset Stations
List on page 56 of this guide to note the name and location of
the stations you have stored.
To Store a Station
1. Press AM•FM to turn on the receiver.
2. Select the band—AM or FM.
3. Select the station you want to store in memory using the
methods described above.
4. Press the PROGRAM button. “MEMORY” blinks in the
display. While “MEMORY” is blinking, press number
buttons on the remote for the station.
For stations 1, 2 or 3 press 0, then press 1, 2, or 3. For
stations 4 through 30, press the numbers directly.