Full Product Manual
10
EN
B. Connect a COAXIAL Cable (not included) from the COAXIAL IN jack to the COAXIAL OUT
jack of your TV, Set-Top Box or Blu-ray/DVD Player.
Then press DIGITAL IN button twice on the remote control or SOURCE button on the
Soundbar to select COAXIAL IN mode.
When COAXIAL IN is selected, the DIGITAL IN LED indicator located on front of Soundbar
will ash slowly.
CONNECT WITH A TV AND OTHER AUDIO DEVICES
A. Connect an Optical Cable (not included) from the OPTICAL IN jack to the OPTICAL OUT
jack of your TV, Set-Top Box or Blu-ray/DVD Player.
Press DIGITAL IN button once on the remote control or SOURCE button on the
Soundbar to select OPTICAL IN mode.
Note: OPTICAL IN and COAXIAL IN supports PCM signal only. You may need to activate
PCM (Downmix) on your source device, e.g. TV, Set-Top Box or Blu-ray/DVD Player.
When OPTICAL IN is selected, the DIGITAL IN LED indicator located on front of Soundbar
will illuminate.