Manual

Theunithasabuilt-intunerthatallowsforFM
radiofunction.TheAMloopantennaallowsfor
AMradiofunction.
Manual tuning
1. Connect the FM antenna and the AM loop
antenna at the back of the unit.
2. Press TUNER button.
3. Tune a station by pressing TUNE G/(_ buttons
repeatedly until the desired station is found.
Alternatively, you can press and hold the
same buttons down for about two seconds
to activate the automatic search function. In
this mode the unit will automatically tune
frequencies until it finds a station.
4. Repeat step 3 to tune to another radio station.
5. Press TUNER button to toggle between FM and
AM.
Storing radio stations
The unit can store up to 30AM/30FM radio stations
in its memory. You can enter every single radio
station yourself or the unit can store all available
radio stations automatically in ascending order.
Automatic preset programming
1. Press TUNER button to enter theTuner mode.
2. Press and hold TUNER button for two seconds
to start automatic preset programming.
3. Radio frequencies will be scanned and stored
automatically. When all the available radio
stations are stored or all 30AM/30FM memory
locations are full, the auto preset programming
function will stop.
Manual preset
1. Tune to a radio station (see Manual tuning for
details).
2. Press MEM/ANGLE button. While the Program
Preset number isstill flashing, input your desired
preset number using the numeric buttons, then
press MEM/ANGLE button to store it.
Retrieving preset stations
1. PressTUNER button to enter the Tuner mode.
2. Press I,_1/I_H buttons to search up or down for
the preset stations or directly press the numeric
buttons.
_1!'7
-22-
EnglishlB(A5).indd 24 \Ui 4/15/2010 20:19:13