Manual

S-VIDEO
If your video component has a S-Video jack
included, you can make use of itte enjoy
enhanced video quality by connecting it to the
relevant S-Video jack at the rear side of the
receiver. One video cable s needed for eacn
component. When S-Video cable is used.
composite video (yellow RCA connector) cable
must also be connected for VCR recording.
Note: Before plugging in the optical cable or
S-Video cable "hake sure to match the shape of
the plug and jack. otherwise you will not be able
to plug in completely.
DVD
DIGITAL CONNECTION
If you have a SAT receiver DVD player or CD player with a digital output, you can make
use of an optical digital connecting cord (net supplied) or coaxial digital connecting
cord (net supplied) to carry the audio portion of the signal and enjoy Delby Digital
sound quality. One optical or coaxial cable is needed for each SAT receiver. DVD
player or CD player. When optical or coaxial cable is used. the analog audio cables are
still needed if recording through a tape or VCR is desired. This receiver provides one
optical and one coaxial digital input for the connection of your components. Please
connect your components (e.g. DVD. SAT or CD) to the appropriate digital inputs and
press FUNCTION and then rotate MULTI JOG to match your connection.
Note: Optical and coax cables carry only the audio portion of the signal. Avidee
connection must also be established for a SAT receiver and DVD player. S-video
provides the best connection for the video portion of the signal. Composite video
(yellow RCA connector) can also be used. It is
important that the same type of cable (S-video or composite/that is connected from the
Home Theater to the TV is used to connect the SAT receiver or DVD player to the
Home Theater.
_'_'- I to S-VIDEO OUT DVD/
I I I_ _D--
$_ t_UDIOOUT_DVD
DIGIT iNPUT-- 12
Connect components
capab e of outputing d
O
tal (e.g. DVD
or SAT) ' standard ,'_
PC[V I format digital , o
signals. Read section on
"lnpu qal Setting"
nd _ __'unae vanced Sou .' _L Multi-cI
Control" carefully to 6 -- Deco,
adj matching . o _ e.g. c
input settings. _
UNIT
BACK PANEL
CD Player
/
to S-VIDEO
to VIDEO tN _TV
to AUDIO OUT
VCR
.....III lpO
FRONT TERMINAL I
Remark If you have a video
camera, video game machine, or an I
extra VCR, connect it to VCR 2 jack
at the front of the rece ver 1
If your CD player is equipped with digits optical jacks, use of optical cable is preferred.
What you need is just one more optical digital connecting cord(not supplied). Plug it in
".he digital input jack of the recewer and select OPTICAL on the receiver setting (see
details on Dg 20 chapter "Input Signal Setting"). You can enjoy better sound quality
brought to you by the optical cable. When optical cable is used, analog cables are sti
needed for recording to tape output.
Note: This receiver has one digital optical jack only. Be sure that such connection does
not prevent optical cable connection of other components (e.g. DVD & SAT_