Manual

Troubleshooting Tips
Receiver/Tuner Operation
STEREOindicator isoff.
• Adjust the antenna.
ThesignalisMono.Severehumor noise.
• The signal is too weak. Connect an external anten-
na.
Remote Control Operation
The remote control does not operate the unit.
• Another function mode is selected on the remote.
Press the correct Source Button.
• No batteries installed. (included with your system)
Install the batteries before attempting to operate the
remote. Be sure to match the + and - ends of each
battery to the symbols shown in the remote battery
compartment.
• The batteries are weak. Replace all batteries.
• The remote is not pointed at the remote control
sensor on the main unit or there is an obstacle
between the remote and the main unit.
• The remote control is too far from the main unit,
move closer.
General
Noaudio.
• Make sure the speakers are connected.
• Check the input connections.
° Check the power cord connections.
• Make sure the MUTE indicator on the front panel is
Off.
• Make sure the digital setting (optical, coaxial or
analog) is correct.
Noaudiofromonechannel
• Check the speaker level setting.
° Check the speaker wire or cable connections.
Noiseoccurswhenthe TVisturnedon.
• The TV is too close to the audio system.
Specificinstrumentssounddisplaced.
• Check the connections between the receiver and
the speakers if the sound does not match the video.
• Press the Source Button for the video source.