Manual

Showing the
Demonstration
Not operational in TUNERmode for
Atlima models.
1. PressDEMOIDIMMER to turn on/off
demonstration mode. The demonstration
scrollsthrougkall displayoperations.
ALARM/CLOCK
Settingthe Time
1, InSTANDBY mode,press
ALAP._IICLOCKuntil the time flashes
onthe display(12-hour clock,24-hour
clockAltima models).
2.Turn the jog to setthe hour (and
AM/PM setting), and then press
INCREASE,
3,Turn the jog to setthe minute and
press INCREASE.
4. PressSET.
Setting the Alarm
RS2501
A180/A185
RS2502iRS252KM/RS2505/RS255KM
A280/A285
1.When the systemison (not in
STANDBY) pressA/.ARM/C£OO(" until
the ONtime flasheson the display
(12-hour clock,24-hour dock Altima).
2.Turn the jog to set the hour, and then pressINCREASE.
3.Turn the jog to set the minute and pressINCREASE.The OFFtime flashes.
4.Turn the jog to set the hour, and then pressINCREASE.
5.Turn the jog to set the minute and pressINCREASE.
RS2503/RS253TK/RS2506,RS2507
A380/A385/A580
Activating the Alarm
PressandreleaseALARM/CLOG(toturnon/offthe alarm.Thealarmis
activewhenthe ALARMindicatorislit.
Displaying HelpMessages
1. PressHELPto turn on/off help mode.
2.While in help mode, pressany button to displaya brief descriptionof the
function. Rotatethe jog to displayanyof the systemfeatures,
and pressSETto displaymore detail.
Adjusting the Display Brightness
1.Pressand hold DEMO/DIMMER for more than 2 seconds.
2.While the dimmer isdisplayed,rotate the jog to the desired level(0 - 3).
Tip: DEMO
Mode does
not affect the
current system
operation.When inactive
the systemautomatically
enters DEMO mode
When the system is
initially plugged in, DEMO
mode is activated
%*... ....................................... *,,,,.o,..,_ .,*,.°,.**.*.*°,.o,,o..,.* ........................ *..°,**,°,,..,**,.*°.* ........ °,.o,.°°.°.,°.,.°,o°..°°,o°.o..* .......... °.,'°
7